  
Pump
Vacuum
Pump
Industrial Pump
     
 
   
New Arrivals
Inventory
|
|
Item # |
DESCRIPTION |
|
34642- |
Aro
Diaphragm Pump, stainless steel, 2" air operated, 2.5" x 2" clamp
connections. |
|
54948p- |
Aro,
Diaphragm Pump model 666100, pneumatically operated, aluminum
construction, rated for maximum capacity of 35 gallons per minute,
1" inlet & outlet with NPT connections, 18 pound weight, formerly
used in mild chemical application |
|
58166p- |
ARO,
Diaphragm Pump model 666151-244C, 316 stainless steel, 1.5" NPT
inlet & outlet, up to an estimated 90 GPM flow rate depending on
fluid being pumped, lift height & air supply, 316 stainless steel
manifold with aluminum center & Teflon balls & diaphragms, comes
with service kit, extra pair of diaphragms, extra balls, requires
pneumatic supply |
|
58165p- |
ARO,
Diaphragm Pump model 666151-244C, 316 stainless steel, 1.5" NPT
inlet & outlet, up to an estimated 90 GPM flow rate depending on
fluid being pumped, lift height & air supply, 316 stainless steel
manifold with aluminum center & Teflon balls & diaphragms, requires
pneumatic supply |
|
58164p- |
ARO,
Diaphragm Pump model 666151-244C, 316 stainless steel, 1.5" NPT
inlet & outlet, up to an estimated 90 GPM flow rate depending on
fluid being pumped, lift height & air supply, 316 stainless steel
manifold with aluminum center & Teflon balls & diaphragms, requires
pneumatic supply |
|
58162p- |
ARO,
Diaphragm Pump model 666151-244C, 316 stainless steel, 1.5" NPT
inlet & outlet, up to an estimated 90 GPM flow rate depending on
fluid being pumped, lift height & air supply, 316 stainless steel
manifold with aluminum center & Teflon balls & diaphragms, requires
pneumatic supply |
|
58163p- |
ARO,
Diaphragm Pump model 666151-244C, 316 stainless steel. 1.5" NPT
inlet & outlet, up to an estimated 90 GPM flow rate depending on
fluid being pumped, lift height & air supply, 316 stainless steel
manifold with aluminum center & Teflon balls & diaphragms, requires
pneumatic supply |
|
56826p- |
Aro,
Diaphragm Pump model 6661T3334C, air operated, non metallic chemical
resistant construction rated for maximum output, 1.5" inlet & outlet
with NPT connection from 5" diameter 4 bolt flanged connections,
check valve design, rated for maximum pneumatic pressure of 120
PSI/8 bar, formerly used in photo chemical processing |
|
58051p- |
ARO,
Plastic Diaphragm Pump model 66053-388, with 1/2" inlet/outlet,
polypropylene valve seats, ball check & diaphragms, ribbed hose
connections on inlet & outlet, pneumatic powered, rated for 13
gallons per minute maximum through put, last used to pump
dishwashing soap to filling machine |
|
54491p- |
Corman
Rupp Industries, Diaphragm type Lab Pump model 146967, single
impulse, features polyethylene diaphragm with adjustable stroke,
with graduated rotating cam, foot switch activated, 115 volt |
|
53578- |
Diaphragm
Pump model PD30AAAPGGGB, ARO metallic air powered, aluminum body,
rated to 275 GPM with 120 PSI (8 bar) air supply, 2.8 gallons per
cycle, 3" NPTF ports, nitrile seat, check ball & diaphragm |
|
45578p- |
Drum
Unloading Pump System stainless steel USDA approved sanitary design
includes a Graco model Senator 4:1 T316 stainless steel pump with a
2" tri clamp outlet can be used on open or closed head drums with a
4-1/2" bung. For pumping fudge, tomato paste, soft peanut butter,
heavy chocolate, jam, & jelly like products up to 14 gallon per
minute at 60 container per minute includes 30" long hinged stainless
steel barrel infeed roller conveyor dual air operated pump assembly
lift cylinders, control box with manual operation switches, requires
external air supply, 80" long x 76" wide x 122" high |
|
29373p- |
Graco
Bulldog, 10:1 painted frame Drum Unloading Station series FOF,
stainless drum ram plate & pump product contact parts, fits a 55
gallon drum. |
|
42659p- |
Graco
Bulldog, Air Operated Drum Pump model (AIR MOTOR) 946-247, series
K99A, features Graco dual piston pneumatically operated pump lift
for drums up to 55 gallon, stainless steel pump with non stainless
wiper plate & white neoprene flexible wiper, pump part #954180,
rated for up to 100 PSI air service, 23 L/Min, 6/GPM flow rate at 10
to 1 ratio, maximum fluid pressure 69 bar or 1000 PSI, includes
original fill station, pneumatic electrical system with foot switch,
formerly used to dispense lubricant, mounted on carbon steel plate
with ramp for drums, 52" x 76" x 72" high OAD |
|
27052p- |
Graco
Senator, Drum Pump, air operated, stainless steel, 2" tri clamp
outlet, mounted on mild steel frame with castors, will work for
viscous products, ¾" inlet air size, not reconditioned yet |
|
54509p- |
Graco, Air
Operated Pump model 206420, series D4F, President series features
model 207352 air motor, stainless steel, 10 to 1 ratio, 3 GPM/12 LPM
flow rate, rated for 180 PSI maximum air pressure, 1" inlet & .75"
outlet with NPT connections |
|
54498p- |
Graco,
Bulldog Drum Pump model 207321, air operated, features all stainless
steel product contact surfaces rated for 15 GPM/57 liters, maximum
air pressure 100 PSI, 5 to 1 ratio, series E92F, air motor model
223905, 3/4" outlet, mounted on drum cover for 24" diameter vessel
with 24" long pump length |
|
58161p- |
Graco,
Diaphragm Pump model 20H07E, stainless steel, 2" NPT inlet & outlet,
up to an estimated 150 GPM flow rate depending on fluid being
pumped, lift height & air supply, 316 stainless steel manifold with
aluminum center & fluoroelastomer balls & diaphragms, requires
pneumatic supply |
|
44253p- |
Graco,
Diaphragm Pump model Husky 1590, stainless steel, 1.5" inlet &
outlet |
|
43489p- |
Graco,
Diaphragm Pump model Husky 1590, stainless steel, 1.5" inlet &
outlet, series H01C |
|
56828p- |
Graco,
Drum Pump model 226040, pneumatically operated, stainless steel,
piston style, designed to enter standard 55 gallon drum bung port,
rated for 6 gallons per minute at 2 to 1 ratio, is wet tested & sold
in good operating, formerly used in mild chemical service for
cleaning products |
|
56821p- |
Graco,
Drum Pump model/part 226040, air operated, all stainless steel
construction with threaded body connection designed to meet standard
drum bung, 1/2" outlet with NPT connection rated for 6 GPM/23 liter
per minute output, 2-1 ratio, rated 100 PSI maximum air pressure &
300 PSI maximum fluid pressure, formerly used in mild chemical
service |
|
48826- |
Graco,
Dual Position Drum Unloading Station, on mild steel tube frame with
two Graco air pumps. |
|
48825- |
Graco,
Dual Position Drum Unloading Station, on stainless square tube frame
with two Graco Senator model 24250 Senator air actuator with
stainless steel electric control cabinet. |
|
57032p- |
Graco,
Piston Pump, air operated, Monarch series, approximately 2.5 GPM,
has ARO model 6516041, dual post drum ram, has 23" diameter aluminum
follower plate, all air controls, mounted on painted steel base
plate, formerly used in cosmetic service |
|
54503p- |
Jaeco Pump
Company, 1 HP Diaphragm style Metering Pump model 62017252T5,
stainless steel, features performance rating by manufacturer of 60
GPH, 1" x 1/2" inlet/outlet with NPT connections, mounted on
stainless steel stationary base with GE drive 230/460/3 phase
voltage, explosion proof design with XP stop/start, 1725 RPM with
right angle gear reducer & manually adjustable pump stroke |
|
43188p- |
Murzan,
Sanitary Diaphragm Pump model P150DL, stainless steel, air operated,
4" inlet & outlet clamp ports, mounted on stainless steel cart with
wheels, mushroom valves, Teflon diaphragms, air fitting 3/8
diameter, quick disconnect fitting, air outlet (1) 3/4" diameter
FNPT |
|
56351- |
Murzan,
Sanitary Drum Unloading System model DUS50, stainless steel, with
Air operated diaphragm pump model P150SL, 4" clamp connection |
|
58207p- |
Sand
Piper, Diaphragm Pump model ST1, type DNG4SS, 1" pneumatic,
stainless steel construction, 1" female NPT, 1" inlet & outlet,
requires pneumatic supply |
|
58229p- |
Sandpiper,
Double Diaphragm Pump model SA2A, 2" pneumatic, type DV3SS,
stainless steel construction, flapper check valves |
|
57803p- |
Sanpiper
Warren Rupp, Diaphragm Pump model ST1A, type DVG1SS, stainless steel
contacts with 1.5 inlet & outlet with NPT connections, ball type
check valves (Teflon diaphragms & check valves), mounted on portable
24" x 48" base with vertically mounted Fulflo filter, carbon steel
basket filter part #2P839, rated for 100 PSI |
|
50253p- |
Warren
Rupp Sand Piper, Diaphragm Pump model SB2A, type TGN2SS, stainless
steel product contacts, 3" inlet with 2-1/2" outlet tri clamp
fittings |
|
42409p- |
Warren
Rupp, electric powered Diaphragm Pump model P05JKATT0SBT1, unit is
capable of pumping up to 58 gallons per minute at up to 250 PSI, can
handle a variety of abrasive, corrosive & viscous products as well
as solids up to 1/4" in diameter, wetted pump end is constructed of
type 316 stainless steel diaphragm is made of TFE/Neoprene, 1.25"
ANSI style flanged discharge & 1.5" ANSI style inlet, ball type
check valve, driven by 7.5 HP 230/460 vac 3 phase motor, carbon
steel base |
|
56823p- |
Wilden,
Diaphragm Pump model 01318120, 1", 10 GPM, Polypro construction, air
operated, vari speed, 11 pounds, runs good, includes muffler |
|
50744- |
Wilden,
Diaphragm Pump model 3A, stainless steel, Carillon air chamber
components, 1" clamp connections, less Wil-Gard monitoring system,
maximum wet suction lift 30', maximum capacity 35 gallons per
minute, maximum solids size 1/4" |
|
54138p- |
Wilden,
Diaphragm Pump model 8, aluminum, 2" inlet & outlet, last used in
paint production, requires pneumatic supply |
|
54137p- |
Wilden,
Diaphragm Pump model M15, aluminum, 3" inlet & outlet, last used in
paint production, requires pneumatic supply |
|
38189p- |
Wilden,
Diaphragm Pump model M2, air operated, features 316 stainless steel
wetted parts, with Teflon diaphragms, 1" inlet & outlet with NPT
connections, rated for maximum flow rate of 37 GPM, maximum solids
size 1/8", 21' suction lift with wet materials & 18' dry materials,
weighs 35 pounds, maximum air pressure 125 PSI |
|
42847p- |
Wilden,
Diaphragm Pump model M8, 316 stainless steel, 2" inlet & outlet,
previously used in a winery, the outside has been painted |
|
50254p- |
Wilden,
Diaphragm Pump model T8SAPBTFTFSTF, 316 stainless steel, 2" inlet &
outlet NPT, item number 0811234, M/O number M422040, was last used
in an almond butter operation |
|
|
58731p- |
Wilden,
Diaphragm pump, 3" stainless steel |
|
|
|
