        
New Arrivals
Inventory |
|
Item # |
DESCRIPTION |
|
57853p- |
Scraper
Agitator for 300 gallon Hamilton kettle, double motion, stainless
steel bridge with food grade polished finish, 16.5" wide x 66" long,
factory gear box in cast aluminum housing, drive motor mounting,
bridge fixtures are designed to meet factory mounts on exterior of
kettle allowing bridge to attach via removable mount pins, formerly
used in food manufacturing |
|
57057p- |
Legion,
Tilting Kettle model TAT4U, stainless steel, features 10" diameter x
5" deep, small volume, designed to sit in stand or table mount &
discharge via tilting, stainless steel jacket rated for maximum
working pressure of 45 PSI at 650º F, stand or table mounting
additional, kettle only |
|
57866p- |
Hamilton,
Triple Motion Agitator, unit designed to fit approximately 60 gallon
kettle, 5 HP 220 volt only 3 phase, 11.6-116 RPM, stainless steel
sanitary wetted parts, 34" diameter x 24" deep agitator dimensions,
equipped with single motion scraper agitator & 2 turbine style
secondary agitators |
|
58327p- |
Groen,
Dual Kettle, self-contained, National Board #41657, 15 PSI steam, 30
PSI water |
|
38471p- |
Groen,
Kettle model INA150, single motion scrape agitator, center bottom
outlet 100 PSI jacket 316 stainless steel |
|
54087- |
Double
Motion Scrape Agitator Assembly for 150 gallon kettle, stainless
steel, 39-1/2" across x 30", from bottom of bridge to bottom of
agitator is 34-1/2", gear head motor drive |
|
37532p- |
Cleveland
Range, Kettle model KDT12T, all stainless steel, tilt type with pour
lip, no stand, no bottom outlet, 50 PSI jacket, National Board
#44794 |
|
57714p- |
5,500
liter Mueller, Kettle, 1,450 gallon, 304 stainless steel
construction, 55" diameter x 134" straight side, dish top & bottom,
jacketed on bottom & 96" up straight side, rated 200 PSI at 200º F,
top entering off center 1.5 HP agitator drive, 230/460 volt, 2 tier
2 blade pitched turbine agitator, 18" manway, (2) 4", (2) 1.5" top
nozzles, 8" center bottom outlet |
|
53834p- |
5,500
liter (1,450 gallon) Mueller, Kettle, 304 stainless steel
construction, 55" diameter x 134" straight side, dish top & bottom,
jacketed on bottom & 96" up straight side, rated 200 PSI at 200º F,
top entering, off center 1.5 HP agitator drive, 230/460 volt, 2
tier, 3 blade pitched turbine agitator, 112 RPM, 18" manway, two 6",
two 4", two 1.5" top nozzles, 8" center bottom, 4" bottom outlets,
on legs |
|
57742p- |
3,000
gallon Walker, Twin Motion Kettle, 316 stainless steel construction,
100" diameter x 96" straight side, flat top, slight cone bottom,
rated ATMO at 250º F internal, 304 stainless steel jacket rated for
75 PSI at 250º F, 19" wide x 60" long 316 stainless steel jacketed
baffle rated 100 PSI at 250º F, anchor agitator with bottom &
sidewall scrape driven by 40 HP 230/460 volt motor drive, 20 HP
230/460 volt top entering off center, Lightnin agitator drive with 2
tier 3 blade pitch agitators, 26" diameter blades, 3" center bottom
outlet, on 4 legs with approximately 24" discharge height, 304
stainless steel skin over jacket, approximate 175" overall height,
National Board #1856 & #1857 |
|
57741p- |
3,000
gallon Walker, Twin Motion Kettle, 316 stainless steel construction,
100" diameter x 96" straight side, flat top, slight cone bottom,
rated ATMO at 250º F internal, 304 stainless steel jacket rated for
75 PSI at 250º F, 19" wide x 60" long 316 stainless steel jacketed
baffle rated 100 PSI at 250º F, anchor agitator with bottom &
sidewall scrape driven by 40 HP 230/460 volt motor drive, 20 HP
230/460 volt top entering off center, Lightnin agitator drive with 2
tier 3 blade pitch agitators, 26" diameter blades, 3" center bottom
outlet, on 4 legs with approximately 24" discharge height, 304
stainless steel skin over jacket, approximate 175" overall height,
National Board #550 & #551 |
|
57727p- |
2,300
gallon Mueller, Kettle, 304 stainless steel construction, 84"
diameter x 98" straight side, dish top, inverted dish bottom,
jacketed for 40 PSI at 300º F, top entering 10 HP 230/460 volt
agitator drive with anchor style agitator, top entering baffle, 24"
manway, (2) 3", (1) 2", (2) 1.5" top nozzles, 3" side bottom outlet
on 4 stainless steel legs, National Board #10324 |
|
57743p- |
2,000
gallon Wilflow, Kettle, stainless steel construction, 7' 6" diameter
x 6' straight side, flat top with covers, dish bottom, jacketed on
bottom & straight side rated 50 PSI at 300º F, anchor agitator with
bottom & sidewall scrape driven by 20 HP 220/440 volt variable speed
motor drive, National Board #1613 |
|
57715- |
14,000
gallon Mueller, Kettle model DF, stainless steel construction,
approximately 12' diameter x 16' 6" straight side, off center cone
top, flat sloping bottom, (2) 4' sections of stainless steel dimple
jacket rated 100 PSI at 100º F, top manway, 16" x 20" oval side
bottom manway, 2" side bottom outlet, mounted on carbon steel frame
with legs |
|
57716- |
12,000
gallon Mueller, Kettle model DF, stainless steel construction,
approximately 11' 6" diameter x 14' 4" straight side, off center
cone top, flat sloping bottom, (2) 4' sections of stainless steel
dimple jacket rated 200 PSI at 100º F, top manway, 16" x 20" oval
side bottom manway, 2" side bottom outlet, mounted on carbon steel
frame with legs |
|
57730p- |
1,500
gallon Talon, Kettle, stainless steel construction, 6' diameter x 6'
6" straight side, open top with flat cover, dish bottom, jacketed on
bottom & straight side for 150 PSI at 300º F, 15 HP top entering
agitator drive, 230/460 volt 1765 RPM, 14.3:1 gear box ratio, 4
blade pitched turbine agitator, 3 baffles, National Board #600 |
|
48400p- |
1,500
gallon Lee, stainless steel Jacketed Kettle, double motion counter
rotating agitation, 20 HP drive, jacket rated 15 PSI at 250º F,
complete with stainless steel top covers |
|
57729p- |
1,500
gallon Lee, Double Motion Kettle, stainless steel construction, 7'
diameter 7' deep, open top with flat covers, hemispherical bottom,
jacketed for 15 PSI at 250º F, double motion agitator with sidewall
scrape & inner opposing paddles driven by 20 HP 230/460 volt motor,
on stand |
|
6718p- |
1,000
gallon Walker, Kettle model P2CBS, processor with single motion side
bottom agitation, 316 stainless steel, jacket rated 125 PSI at 353º
F, jacket leaks, dish bottom, flat top, half lid in top, hydraulic
agitator drive, 78” diameter x 65” straight wall height, 3" center
bottom sanitary drain, various sanitary inlets in top, on pipe legs,
can add hydraulic power unit or switch to electric drive at cost, it
leaks |
|
33447p- |
1,000
gallon Steam Jacketed Kettle, stainless steel, unrated painted mild
steel jacket, center bridge with lift top covers, double motion
combination 15 HP scraper blade & 5 HP Lightnin propeller agitation,
painted mild steel legs |
|
54153p- |
1,000
gallon Lee, Kettle, stainless steel, top is single walled & bottom
is jacketed, jacket rated for 125 PSI at 375º F, hemispherical
bottom with anchor style sweep agitator & baffles for increased
agitation, agitator driven by hydraulic motor, 72" diameter x 48"
straight side x 31" dish depth, 143" overall height with agitator,
1/3 hinged top, jacket has 2" threaded fittings, 4" & 5" interior
center sanitary discharge, 4" sanitary fitting in wall of
hemispherical bottom |
|
55064p- |
1,000
gallon Lee, Kettle, stainless steel, top half single walled, bottom
half jacketed, jacket rated for 125 PSI at 375º F, hemispherical
bottom with anchor style sweep agitator, baffles for increased
agitation, agitator driven by hydraulic electric motor, 72" diameter
x 48" straight side x 31" dish depth, 143" overall height with
agitator, 1/3 hinged top, jacket has 2" threaded fittings, interior
kettle has 4" in side of hemispherical bottom, 5" center sanitary
discharge, 4" sanitary fitting in wall of hemispherical bottom |
|
58153p- |
1,000
gallon Lee, Kettle, stainless steel, National Board #5431, top of
kettle is single walled & bottom is jacketed, entire unit has
stainless steel outer covering, jacket rated 90 PSI at 332º F,
hemispherical bottom with anchor style sweep agitator & baffles for
increased agitation, agitator driven by hydraulic motor, 72"
diameter x 48" straight side x 31" dish depth, overall height with
agitator 136", top has 1/3 hinged top, jacket has 2" threaded
fitting, interior has (2) 4" center sanitary discharge, 4" sanitary
fitting in wall of hemispherical bottom |
|
54152p- |
1,000
gallon Lee, Kettle, stainless steel, National Board #5300, top is
single walled & bottom is jacketed, entire unit has stainless steel
outer covering, jacket rated for 40 PSI at 287º F, hemispherical
bottom with anchor style sweep agitator & baffles for increased
agitation, agitator driven by hydraulic motor, 72" diameter x 48"
straight side x 31" dish depth, 136" overall height with agitator,
1/3 hinged top, 2" threaded fittings, (2) 4" center sanitary
discharge, 4" sanitary fitting in bottom wall |
|
58152p- |
1,000
gallon Lee, Kettle, stainless steel, National Board #5299, top of
kettle is single walled & bottom is jacketed, entire unit has
stainless steel outer covering, jacket rated 40 PSI at 287º F,
hemispherical bottom with anchor style sweep agitator & baffles for
increased agitation, agitator driven by hydraulic motor, 72"
diameter x 48" straight side x 31" dish depth, overall height with
agitator 136", top has 1/3 hinged top, jacket has 2" threaded
fitting, interior has 4" center sanitary discharge, 4" sanitary
fitting in wall of hemispherical bottom |
|
58058p- |
1,000
gallon Lee, Kettle model 1000U12S, double motion counter rotating
scraper agitated, jacketed, stainless steel, National Board #3672,
approximately 72" diameter, bottom outlet, jacket rated up to 100
PSI maximum pressure (only side jacket/bottom jacket no good),
agitation double motion counter rotating scraper agitation with
nylon scrapers (Lee type DA) driven by 10 HP 3/60/220-440 volt motor
thru gear set drive, kettle & agitator need assembly & dome drive
parts (bearings, seals) |
|
58056p- |
1,000
gallon Lee, Kettle model 1000D9MS, single motion, National Board
#5970, 316 stainless steel, vertical, 72" diameter x 72" deep, open
top, no cover, jacketed hemispherical bottom, rated 58 PSI at -20º
to 306º F, bolt on stainless steel agitator bridge with new Lee
agitator, assembly #B-19220, anchor style with scrapers, driven by 5
HP 3/60/230/460 volt, 1725 RPM gear motor, ratio 68.63 to 1, 4"
center bottom outlet, mounted on 4 stainless steel legs, approximate
15" discharge height |
|
58057p- |
1,000
gallon Lee, Kettle model 1000D9MS, double motion counter rotating
scraper agitated, National Board #5969, 316 stainless steel,
vertical, 72" diameter x 72" deep, open top, no cover, jacketed
hemispherical bottom, rated 58 PSI at -20º to 306º F, bolt on
stainless steel agitator with new Lee agitator, assembly #B19219,
anchor style with scrapers & inner bar agitator, driven by 7.5 HP
3/60/230/460 volt 1735 RPM gear motor, ratio 17.71 to 1 with Lee
gear box, 4" center bottom outlet, mounted on 4 stainless steel
legs, approximate 15" discharge height |
|
52387p- |
1,000
gallon DCI, Kettle, jacketed, 316 sanitary stainless steel
construction, 7' diameter x 3' straight side, dished top & bottom,
rated 30/-15 PSI at 300º F internal, jacketed on bottom head & full
straight side for 75 PSI at 320º F, 18" manway, one 2", three 1" top
nozzles, 2" center bottom outlet, on legs, National Board #1139 |
|
52388p- |
1,000
gallon DCI, Kettle, 316 sanitary stainless steel construction, 7'
diameter x 3' straight side, dished top & bottom, rated 30/-15 PSI
at 300º F internal, jacketed on bottom head & full straight side for
75 PSI at 320º F, 18" top manway, (1) 2", (3) 1" top nozzles, 2"
center bottom outlet, on legs, National Board #2926 |
|
37574p- |
1,000
gallon capacity Hamilton, Kettle, all stainless steel, 58 PSI
jacket, National Board #195, 4" discharge |
|
55746p- |
850 gallon
Lee, Double Motion Vacuum Kettle model 850U9MS, 316L stainless
steel, vertical, 66" diameter x 89" straight side, dished top &
bottom, #4 internal finish non code rated for 15 PSI & full vacuum
at -20º to 250º F, 304 stainless steel Uniflow coil jacket rated 125
PSI at -20º to 250º F, 1-1/2" thick fiberglass insulation with 304
stainless steel sheathing, fixed stainless steel agitator bridge,
dual motion agitator, anchor style with scrapers, inner bar type
agitator, driven by 30 HP, 3/60/230/460 volt, 1760 RPM motor thru
Lee heavy duty DM-3 gear box, output 25.75 RPM, top entering
sprayball, top openings 1", (2) 1.5" tri clamp, (2) 3" sight glass,
3.5" drive, 18" manway with cover, 4" tri clamp center bottom
outlet, mounted on 4 stainless steel legs, approximate 18" discharge
height |
|
57495p- |
825 gallon
Lee, Vacuum Kettle model 825D9MT, 316 stainless steel construction,
68" diameter x 70" deep bowl, dome top, hemispherical bottom, rated
15 PSI/full vacuum internal at 250º F, 304 stainless steel jacket
rated 40 PSI at 287º F, double motion agitator with sidewall scrape
& inner opposing paddles driven by 10 HP 460 volt motor, hinged top
with pneumatic tilting mechanism, 18" manway, (4) 4", (1) 3", (2)
2", (1) 1.5" top nozzles, 2" center bottom outlet, #4 polish on
internal & external, on 4 legs |
|
53836p- |
825 gallon
Lee, Double Motion Vacuum Kettle model 825D9MT, 316 stainless steel
construction, 68" diameter x 70" deep bowl, dome top, hemispherical
bottom, rated 15 PSI/full vacuum internal at 250º F, 304 stainless
steel jacket rated 40 PSI at 287º F, double motion agitator with
sidewall scrape & inner opposing paddles driven by 10 HP 460 volt
motor, hinged top with pneumatic tilting mechanism, 18" manway, (4)
4", (1) 3", (2) 2", (1) 1.5" top nozzles, 2" center bottom outlet,
#4 polish on internal & external, on 4 legs |
|
57496p- |
800 gallon
Lee, Kettle model 800D, 316 stainless steel construction, 68"
diameter, dish top, hemispherical bottom, jacketed bottom & side
rated 90 PSI at 332º F, off center Lightnin Vector agitator model
V5S375, 5 HP 230/460 volt XP motor with stainless steel shaft &
propeller blade, 24" manway, (4) 4", 2.5", 2" top nozzles, mounted
on 3 stainless steel legs, National Board #7426 |
|
56564p- |
600 gallon
Kettle, stainless steel construction, 4' diameter x 6' deep, flat
top, dished bottom with center bottom outlet, includes jacket with
stainless steel shroud, complete with sweep/scraper agitation,
driven by 3 HP motor |
|
51407p- |
600 gallon
Cherry Burrell, Kettle model EPDCA, stainless steel, jacketed for
ammonia cooling, has top entering sweep type agitator with scrapers,
3 HP & has sprayball, kettle has (2) 6" diameter top inlets, (2) 1"
diameter top inlets & 18" top manway 3" center bottom discharge with
ball valve |
|
56871p- |
500 gallon
Tolan, Jacketed Kettle 316L stainless steel, National Board #1585,
jacket has working pressure (MAWP) rating of 90 PSI at 330º F, 54"
diameter x 36" straight side with 27" hemispherical bottom, top has
24" x 14.5" manway, (6) 3" tri clamp fittings, 3.5" tri clamp
fitting, 4" tri clamp fitting & (2) 6" tri clamp fittings, side has
(2) 2" NPT fittings & temperature gauge, bottom has 3" tri clamp
center discharge, 3" tri clamp fitting & (2) 2.5" flanged fittings,
67" diameter x 100" high |
|
58154p- |
500 gallon
Pardo, Kettle, stainless steel, National Board #2105, top of kettle
is single walled & bottom is jacketed, jacket rated for 100 PSI at
337º F, hemispherical bottom with anchor style sweep agitator &
baffles for increased agitation, agitator is driven by hydraulic
motor, 60" diameter x 30" straight side x 24" dish depth, overall
height with agitator 118", top has 1/3 hinged top, jacket has 2"
threaded fitting, interior kettle has 4" center sanitary discharge,
outer skin of jacket show repairs but unit has been pressure tested
& has no leaks |
|
58435p- |
500 gallon
Lee, Scrape Agitator Kettle, stainless steel, jacketed,
hemispherical bottom, National Board #11259, interior dimensions 60"
diameter x 20" straight side height x 30" hemispherical bottom,
overall dimensions 82" diameter x 84" high with legs & agitator,
bottom has 4" center tri discharge 14" from the ground, top has (2)
1/3 hinged lids, (2) 3" tri clamp, (1) 2" tri clamp, 1" tri clamp,
1/2" tri clamp inlets, jacket has maximum working pressure (MAWP) is
40 PSI at 287º F, minimum design metal temperature (MDMT) of -20º F
at 40 PSI, 2.5" inlet & outlet, equipped with side & bottom scrape
agitator, agitator is driven by 5 HP 300-1800 RPM Euro drive with
16.79 ratio gear reduced motor, requires 230/460 3 phase electrical
supply, last used in food processing for 2 weeks |
|
54149p- |
500 gallon
Lee, Kettle, stainless steel, top is single walled & bottom is
jacketed, jacket rated for 90 PSI at 350º F, hemispherical bottom
with anchor style sweep agitator & baffles for increased agitation,
agitator driven by 2 HP electric motor, 64" diameter x 24" straight
side x 28" dish depth, overall height with agitator is 144" 1/3
hinged top, jacket has 1" threaded fittings, 3" center sanitary
discharge, 4" sanitary fitting in wall of hemispherical bottom,
requires 230/460 vac 3 phase electrical |
|
52372p- |
500 gallon
Lee, Jacketed Kettle model 500UDBT, jacket rated 90 PSI at 332º F,
National Board #2309, was mezzanine mounted, has leg mounts but no
legs |
|
57732p- |
500 gallon
Lee, Double Motion Kettle, stainless steel construction, jacketed
for 30 PSI at 280º F, double motion agitator with sidewall scrape &
inner opposing paddles driven by 7.5 HP motor, open top with hinged
covers, hemispherical bottom, tilt out agitator, on stand with
bottom outlet |
|
56992- |
500 gallon
Kettle, single shell, open top, 3" bevel seat outlet, painted mild
steel legs |
|
56873p- |
500 gallon
Hicks Equipment, Jacketed Kettle, 316L stainless steel, National
Board #4, jacket has maximum working pressure (MAWP) rating of 90
PSI at 330º F & was hydrostatically tested at 140 PSI, 54" diameter
x 36" straight side with 27" hemispherical bottom, top has 24" x
14.5" manway, (6) 3" tri clamp fittings, 3.5" tri clamp fitting, 4"
tri clamp fitting & (2) 6" openings, side has (2) 2" NPT fittings &
temperature gauge, bottom has 3" tri clamp center discharge, 3" tri
clamp fitting & (2) 2.5" flanged fittings, 67" diameter x 100" high
total dimensions |
|
54151p- |
500 gallon
Hamilton, Kettle, rated for 90 PSI at 650º F, bottom half jacketed,
67.5" diameter x 20" straight side height x 27" deep dish bottom, 3"
sanitary center discharge, 2" NPT fittings on jacket, stands 72"
high with 20" discharge distance with 4 carbon steel legs,
miss-fitting 50/50 split removal lid, last used in the food
industry, no agitation |
|
48206p- |
500 gallon
Hamilton, Kettle, jacketed double motion agitated, all stainless
steel construction with food grade polished finish, stainless steel
jacket rated for 40 PSI at 650º F service, 68" diameter x 48" deep,
counter rotating agitator features floating nylon scraper driven by
Reliance 5 HP variable speed drive 31.4 to 134 RPM, 208-230/460/3
phase voltage mounted on stainless steel bridge & coupled to
Hamilton gear box, 2" center bottom discharge with flush seating
ball valve & 12" floor |
|
57733p- |
500 gallon
Hamilton, Double Motion Kettle, stainless steel construction,
jacketed for 10 PSI at 240º F, double motion agitator with sidewall
scrape & inner opposing paddles, driven by 4-5 IN HP 230/460 volt
motor, open top with cover, hemispherical bottom, on stainless steel
legs, National Board #5655 |
|
53797p- |
500 gallon
Groen, Single Motion Kettle model 500SP, heavy duty scrape
agitation, 8" off center dump gate discharge & 2" sanitary
discharge, bridge mounted heavy duty 15 HP drive with gear reducer
agitator, with covers, mounted on hip sockets with mild steel legs,
rated 90 PSI at 338º F, 316 stainless steel |
|
55799p- |
500 gallon
Groen, Kettle model N500SP, stainless steel, jacketed, hemispherical
bottom, jacket on the hemispherical portion rated at 45 PSI, jacket
has 2" NPT infeed & discharge fittings, jacket is carbon steel,
kettle has 60" diameter x 30" straight side x 24" hemispherical
bottom, bottom has 2" flanged center discharge, (4) 3" diameter
carbon steel legs, has some obvious repairs, dings, & scrapes,
jacket does not leak |
|
55798p- |
500 gallon
Groen, Kettle model N500SP, stainless steel, jacketed, hemispherical
bottom, jacket on the hemispherical portion rated at 25 PSI, jacket
has 2" NPT infeed & discharge fittings, jacket has stainless steel
protective cover, kettle has 60" diameter x 30" straight side height
x 24" hemispherical bottom, bottom has 2" flanged center discharge,
(4) 3" diameter carbon steel legs, has some obvious repairs, dings,
& scrapes, jacket does not leak |
|
48731p- |
500 gallon
Groen, Kettle model INA2TA500, single motion with twin action INA
angle mounted agitator for viscous products & Hi shear homogenizing
mixer, 316 stainless steel construction, rated 45 PSI |
|
47078p- |
500 gallon
Groen, Kettle model INA2500, single motion scrape with INA angle
mounted agitator for viscous products, 304 stainless steel
construction, rated 45 PSI, 5' diameter x 8' high dimensions |
|
47077p- |
500 gallon
Groen, Kettle model 500SP, single motion with heavy duty scrape
agitation, 8" off center dump gate discharge & 2" sanitary
discharge, bridge mounted heavy duty 15 HP drive with gear reducer
agitator, with covers, mounted on hip sockets with mild steel pipe
legs, rated 90 PSI at 338º F, type 316 stainless steel |
|
56876p- |
500 gallon
Groen, Jacketed Kettle model N500SP, stainless steel, hemispherical
bottom, jacket on hemispherical portion rated at 25 PSI, jacket has
2" NPT infeed & discharge fittings, jacket has stainless steel
protective cover, 60" diameter x 30" straight side x 24"
hemispherical bottom, bottom has 2" flanged center discharge, (4) 3"
diameter carbon steel legs |
|
56875p- |
500 gallon
Groen, Jacketed Kettle model N500SP, 316 stainless steel,
hemispherical bottom, jacket on hemispherical portion rated at 45
PSI at 300º F, jacket has 2" NPT infeed & discharge fittings, jacket
has carbon steel protective cover, 60" diameter x 30" straight side
x 24" hemispherical bottom, bottom has 2" flanged center discharge,
(4) 3" diameter carbon steel legs |
|
47079p- |
500 gallon
Groen Kettle model 500SP, single motion with heavy duty scrape
agitation, 8" off center dump gate discharge & 2" sanitary
discharge, bridge mounted heavy duty gear box agitator, with covers,
mounted on hip sockets with mild steel legs, rated 90 PSI at 338º F,
type 321SS |
|
56664- |
500 gallon
Dover, Semi Hemispherical Kettle, stainless steel single wall, 60"
diameter x 60" overall height, with 4 pads for floor mount legs or
ceiling suspension mounting, 2" air actuated kettle outlet ball
valve |
|
54891p- |
500 gallon
Cherry Burrell, Scraper Agitated Kettle, jacketed, 54" diameter x
48" deep, non rated dimple jacket with polished stainless steel
shroud, full angular mount scraper agitator with 3 HP drive & gear
reducer by Eurodrive, 3" center bottom discharge with tri clamp
connection, 20" floor clearance port for flush seating temperature
probe, mounted on 3 s/s legs with leveling feed, jacket will not
hold pressure & multiple leaks, 1 leg of agitator is in retreating
fashion, used in food |
|
26758p- |
400 gallon
Vertical Cylindrical Kettle, dome top, dish bottom, coil jacket,
1.5" BS outlet, stainless steel exterior, 50" long x 48" diameter
tank dimensions, 74" high x 66" diameter overall dimensions, manhole |
|
54033p- |
400 gallon
Lee, Steam Jacketed Kettle model 400D3T, with double motion
scraper/agitator, 48" inner diameter x 56" deep hemispherical bottom
vessel with 2" center bottom outlet with tri clamp discharge
fitting, stainless steel steam jacket manufacturer tagged, National
Board coded, & ASME stamped for 40 PSI, double motion scrape surface
agitation, with new side scrapers, on stainless steel bridge, with
10 HP 230/460 volt 3 phase drive motor, all stainless steel vessel &
agitator drive support bridge, painted steel A frame support, steam
jacket has been hydrostatically pressure tested to assure no leaks,
while the double motion agitator has been test ran & serviced |
|
57734p- |
400 gallon
Lee, Kettle model 400D, stainless steel construction, 58" diameter,
open top, hemispherical bottom, jacketed for 90 PSI at 332º F,
bridge mounted Quadro Y tron mixer model Y3ST8 48" long, stainless
steel shaft with 8" diameter blade, 10 HP 230/460 volt 1750 RPM
motor S/N Y3-0072, kettle on legs with 2" center bottom outlet,
National Board #6052 |
|
56872p- |
400 gallon
Groen, Jacketed Kettle, stainless steel, National Board #138786,
product chamber rated at 15 PSI maximum working pressure (MAWP) &
full vacuum at 30" Hg., jacket has MAWP rating of 100 PSI at 338º F
& minimum design metal temperature (MDMT) rating of -20º F at 100
PSI, 60" diameter x 17.5" straight side height with 30"
hemispherical bottom, top has 18" diameter manway rated for 15 PSI
at 250º F, 15" wide x 64" long center agitator bridge, (4) 3" tri
clamp fittings, 2" tri clamp fitting & 1.5" tri clamp fitting, side
has (6) 2" NPT fittings, bottom has 4" tri clamp discharge & (3) 2"
NPT fittings, side sweep agitator blade but no drive, 70" diameter x
90" high total dimensions |
|
51759p- |
350 gallon
Steam Kettle, stainless steel, 2/3 jacketed, open top, 3" outlet,
stainless steel legs, interior patches, no National Board or MFG
label |
|
55802p- |
340 gallon
Groen, Processing Kettle model AM300, jacketed, stainless steel,
flat bottom, jacket has maximum working pressure of 30 PSI, no
National Board stamp, jacket has (2) 1.5" NPT fittings, top of
processor has agitator bridge with 1 HP sweep agitator, 2.5" NPT
fitting, 2.5" sanitary tri clamp fitting, & 2" sanitary tri clamp
fitting, bottom has 3" sanitary tri clamp side discharge & 1.5"
sanitary tri clamp fitting, 47" diameter x 47" straight side &
including 4 legs, agitator has an overall height of 74", (2) 1/3
hinged lids with gating |
|
57498p- |
300 gallon
Sharpsville, Kettle, 304 stainless steel construction, 44" diameter
x 48" straight side, open top, shallow cone bottom, jacketed on
straight side rated 150 PSI at 366º F, 2" center bottom outlet, on 4
carbon steel legs |
|
53839p- |
300 gallon
Lee, Turbo Emulsifier Kettle model 250U12S, stainless steel
construction, 48" diameter x 45" straight side, open top with 3
piece cover, dish bottom, jacketed for 100 PSI at 338º F, double
motion agitator with sidewall scrape driven by 20 HP 230/460 volt
motor, 30 HP 230/460 volt high shear motor less shaft & blade, 4"
center bottom outlet on legs, National Board #5960, overall height,
on stand and with mixer, is measured at 102" |
|
37576p- |
300 gallon
Lee, Kettle, 40 PSI jacket, 6" outlet, National Board #1272 |
|
50523p- |
300 gallon
Hubbert, Kettle stainless steel, hemispherical bottom, jacket rated
100 PSI at 337º F, National Board #177, equipped with 5 HP Lightnin
type agitator, agitator has 2" shaft with two 12" three prop blades,
tank has 42" diameter with 38" straight side height & 19" deep dish
bottom, bottom has 4" flush mount pneumatically operated discharge
valve, open top has lid with 18" manway, one 8", one 1", one 2"
sanitary fittings & 6" flanged fitting for dry product hopper,
thermowell, requires 230/460 vac 3 phase electrical supply for
agitator & pneumatic supply for discharge valve |
|
46185p- |
300 gallon
Groen, Scrape Agitated Fully Jacketed Open Top Kettle model RA300SP,
all stainless steel construction with fully jacketed, insulated &
stainless steel shrouded body, 90 PSI at 338º F, single motion full
scraping agitator with nylon finger scrapers driven by 3 HP bridge
mounted gear motor, 230/460/3 phase voltage, rotates agitator at
approximately 30 RPM, agitator is captured in bottom center receiver
to prevent deflection, bridge mounted large spade shaped baffle
hangs from bridge, 2 loose fitting covers & removable dump grate,
port for flush seating temperature sensor, 2" off center bottom
discharge with 18" floor clearance, mounted on (4) 3" mild steel
pipe legs with hip sockets |
|
56870p- |
300 gallon
Groen, Kettle model NEM300, stainless steel, with dual motion scrape
agitation, National Board #110223, interior is constructed of 316
stainless steel & external skin is constructed of 304 stainless
steel, jacket is designed for 80 PSI at 325º steam, mixing system
consists of 5 HP (23 RPM) scrape agitator & 3 HP (365 RPM) 12" prop
agitator, 3 zone jacket has 1.25" threaded fittings, 2.5" bottom
discharge with flush mount pneumatic valve, inside diameter 54" with
32.5" straight side height, 23.5 dish bottom, overall dimensions
with agitator & carbon steel legs 62.5" diameter x 120" high,
requires 230/460 vac 3 phase electrical supply |
|
54143p- |
300 gallon
Groen, Kettle model NEM300, stainless steel, double motion scrape
agitation, National Board #110222, interior constructed of 316
stainless steel & external skin is 304 stainless steel, jacket
designed for 80 PSI at 325º F steam, mixing system consist of 5 HP
(23 RPM) constant speed scrape agitator & 3 HP (365 RPM) constant
speed 12" prop agitator, 3 zone jacket has 1.25" threaded fittings,
2.5" bottom discharge with flush mount pneumatic valve, 54" inside
diameter x 32.5" straight side height x 23.5" dish bottom, overall
dimensions with agitator & carbon steel legs 62.5" diameter x 120"
high, requires 230/460 vac 3 phase electrical supply, drawing on
file |
|
54144p- |
300 gallon
Groen, Kettle model NEM300, stainless steel, double motion scrape
agitation, National Board #110220, interior constructed of 316
stainless steel & external skin is 304 stainless steel, jacket
designed for 80 PSI at 325ºF steam, mixing system consist of 5 HP
(23 RPM) constant speed scrape agitator & 3 HP (365 RPM) constant
speed 12" prop agitator, 3 zone jacket has 1.25" threaded fittings,
2.5" bottom discharge with flush mount pneumatic valve, 54" inside
diameter x 32.5" straight side height x 23.5" dish bottom, overall
dimensions with agitator & carbon steel legs 62.5" diameter x 120"
high, requires 230/460 vac 3 phase electrical supply, drawing on
file |
|
58147p- |
300 gallon
Groen, Kettle model N300SP, stainless steel, hemispherical bottom,
jacket does not hold pressure (jacket leaks), jacket has 1.5" NPT
fitting & 1" NPT fitting, 54" diameter x 18" straight side x 27"
hemispherical bottom, bottom has 1.5" flanged center discharge, on 4
carbon steel legs |
|
57497p- |
300 gallon
Four Corp., Kettle, 316 stainless steel construction, 48" diameter x
36" straight side, dished top & bottom, rated 100 PSI at 350º F
internal, jacketed for 150 PSI at 350º F, 18" manway with 4 sight
glasses in cover, 3" sight glass, (5) 2" top nozzles, 2" center
bottom outlet, on 3 stainless steel legs with 6" discharge height,
National Board #813 |
|
56066p- |
300 gallon
capacity Chester Jensen, Kettle model 70N40, 7' diameter x 23"
straight side plus cone bottom, double motion agitation, includes
bottom scraper agitation with Teflon scrapers, center driven prop
type agitation & internal baffle, includes 5/2.5 HP 2 speed motor &
3/1.5 HP 2 speed motor, rated for 460 volt 3 phase 60 cycle,
includes dimpled jacket (jacket leaks), mounted on (4) 4" diameter
stainless steel pipe legs, approximately 5' discharge height,
stainless steel hinged lids |
|
46173p- |
300 gallon
BH Hubert, Open Top Food Grade Jacketed Kettle, all stainless steel
construction, 56" diameter x 44" deep, National Board #5378, 100 PSI
at 337º F, 3" center bottom discharge with tri clamp connection &
16" discharge height, mounted on 3 interconnected stainless steel
legs from body skirt, heavy gauge brim ring, twin opposed mountings
at brim for bridge are slightly off of center line, all mounting
feet are fitted with load cells & interfaced in controller housed in
wash down enclosure, formerly used in prepared foods industry |
|
58151p- |
300 gallon
APV, Processing Kettle, stainless steel, jacket, conical bottom,
National Board #8127, interior dimensions 64" diameter x 16"
straight side height x 20" cone, overall dimensions 80" diameter x
90" high with legs & agitator, bottom has 3" center tri clamp
pneumatic ball valve for product discharge, top has (2) 1/3 hinged
lids, 4" tri clamp, 3" tri clamp, (3) 2" tri clamp, (2) 1" tri
clamp, dimple jacket has maximum working pressure (MAWP) 75 PSI at
350º F, minimum design metal temperature (MDMT) of -20º F at 75 PSI,
2.5" inlet & outlet, equipped with bottom scrape agitator (scraper
blades missing), agitator is driven by 3 HP 1740 RPM with 97.89
ratio gear reduced motor, requires 208-230/460 3 phase electrical
supply |
|
58148p- |
300 gallon
APV, Processing Kettle, stainless steel, jacket, conical bottom,
National Board #413, interior dimensions 64" diameter x 16" straight
side height x 20" cone, overall dimensions 80" diameter x 90" high
with legs & agitator, bottom has 3" center tri clamp pneumatic ball
valve for product discharge, top has (2) 1/3 hinged lids, 4" tri
clamp, 3" tri clamp, (3) 2" tri clamp, (2) 1" tri clamp, dimple
jacket has maximum working pressure (MAWP) 150 PSI at 350º F,
minimum design metal temperature (MDMT) of -20º F at 150 PSI, 2.5"
inlet & outlet, equipped with bottom scrape agitator (scraper blades
missing), agitator is driven by 3 HP 1740 RPM with 97.89 ratio gear
reduce motor, requires 208-230/460 3 phase electrical supply |
|
58146p- |
275 gallon
Hubbert, Kettle, stainless steel, half jacketed hemispherical
(bottom) portion rated at 100 PSI at 337º F, National Board #275,
jacket has (4) 1.5" NPT fittings on side & (1) 1.5" NPT fitting on
bottom, 50" diameter x 16.5" straight side x 25" hemispherical
bottom, bottom has 1.5" tri clamp center discharge 3" from ground |
|
55133p- |
275 gallon
Gifford Wood Co., Kettle, stainless, 45" diameter x 28" straight
side height with 20" hemispherical bottom, has an open top with
removable hinge lid, has a 3/4 HP clamp on agitator with a 52" long
x 3/4" diameter shaft and 3 blade 12" prop, the unit is on 4 carbon
steel legs, has a 16" clearance from discharge to ground, 2" center
discharge with ball valve, overall height of unit with agitator and
stand is 92", requires 230/460 vac 3 phase electrical supply, (not
jacketed) |
|
57735p- |
250 gallon
Lee, Twin Motion Kettle, stainless steel construction, approximately
52" diameter x 40" deep, open top, hemispherical bottom, carbon
steel jacket rated 135 PSI, bridge mounted twin motion agitator with
bottom & sidewall scrape & inner opposing paddle agitation,
approximately 4" center bottom outlet, on carbon steel legs |
|
46172p- |
200 gallon
Sanitary Paddle Agitated Kettle, 46" diameter x 38" deep, agitated
by 8 blade paddle agitator from horizontal shaft with paddles
contouring to hemispherical interior of vessel, driven by 1 HP air
operated drive with dual reduction gear reducer, 3" center bottom
discharge with tangential front outlet & tri clamp connection,
external frame with brim ring & floor frame, removable partial dump
grate, 58" overall height, no jacket, no PSI |
|
46171p- |
200 gallon
Paddle Agitated Sanitary Open Top Mixing Kettle, 48" diameter x 36"
deep vessel, 8 arm horizontal mounted paddle agitator driven by side
mount hydraulic drive with on shaft gear reducer, agitator paddles
contour to vessel hemispherical interior, mounted on 3 stainless
steel legs with mounting pads to accommodate casters, 4" center side
bottom discharge with tangential front outlet & tri clamp
connection. No jacket, No PSI |
|
46170p- |
200 gallon
Paddle Agitated Sanitary Open Top Mixing Kettle, 45" diameter x 42"
deep vessel, 8 blade paddle type mixer on horizontal shaft passing
through vessel with blades contouring to interior, requires drive,
mounted on 8" heavy duty casters with tubular frame stand, 3" center
bottom discharge with tangential outlet & tri clamp connection, no
jacket, no PSI |
|
35774p- |
200 gallon
Open Top Jacketed Kettle, stainless steel sanitary, all stainless
steel body with rolled brim, carbon steel jacket, 48" diameter x 36"
deep, 1.5" center bottom discharge with NPT connection, 14" floor
clearance, mounted on 3 interconnected flat stock legs, jacket
painted steel, needs new paint. |
|
41750p- |
200 gallon
Lee, Pressure Wall Steam Kettle, stainless steel, open top
hemispherical bottom 3" threaded outlet maximum working pressure 90
PSI maximum temperate 350º F, 48" diameter x 51" overall height
stainless steel legs with pad feet NOTE* jacket patched, no lid,
rust and deep gouges inside, stress cracks where jacket is welded to
liner |
|
52974p- |
200 gallon
Lee, Kettle, stainless steel, jacket rated 40 PSI at 288º F,
measures 48" diameter x 36" deep, 2" center discharge |
|
44883p- |
200 gallon
Lee, Kettle stainless steel construction jacketed for 100 PSI at
335º F complete with bridge mounted Lightnin model MN3 agitator
drive with 1" diameter stainless steel shaft & prop, kettle measures
40" diameter x 40" deep |
|
50731p- |
200 gallon
Kettle, steam jacketed, center bridge with lift top covers, single
motion non anchor paddle agitation less scraper blades, unrated
jacket, 2-1/2" Q-line outlet, 48" x 48" x 106" overall height, 38"
from floor to outlet |
|
11118p- |
200 gallon
Kettle stainless steel jacketed, 15 PSI, carbon steel jacket & legs,
patch welded inside of the kettle, welds are not ground, chemical
grade, jacket is two thirds up the sides, no valves. |
|
54895p- |
200 gallon
Hamilton, Double Motion Kettle, scraper agitated, all stainless
steel food grade construction, National Board stamped (seal only, no
number), stainless steel jacket rated for 45 PSI at 75º F (hydro
tested to 75 PSI), 35" deep, 8" center bottom discharge reducing to
flange to 1.5" with NPT connection, stainless steel center bridge
supports, scraper/counter rotating paddle agitator, driven by 3 HP
US Motors (TEFC) variable drive, 30-100 RPM 208-230/460/3 phase
voltage |
|
51042p- |
200 gallon
Groen, Steam Jacketed Kettle model N200, center bridge with lift top
covers, single motion non anchor paddle agitation less scrapper
blades, 40 PSI jacket rating, 2-1/2" Q line outlet |
|
48955p- |
200 gallon
Groen, Pressure Wall Steam Kettle model 52x33, stainless steel, open
top, hemispherical bottom, 2.5" #15 center bottom outlet, 50 PSI
jacket, 52" diameter x 33" deep x 54" OAHT, mild steel legs with pad
feet |
|
37546p- |
200 gallon
Groen, Kettle model INA2200, type 316 stainless steel, maximum
working pressure on jacket 100 PSI, National Board #138077, single
motion scrape agitator, SEW Euro drive motor 230/460 volt, 2 HP 7.2
to 36 final RPM, 4" tri clamp outlet. |
|
51232p- |
200 gallon
Groen, Kettle model INA2200, side sweep & dual agitation, 316
stainless steel, 100 PSI jacket at 338º F, gentle inclined single
motion scraper agitation, 1.5 HP 3/60/208/230/460/1725 RPM gear head
motor, 2" bottom center drain 16" from floor, 2/3 hinged lid, jacket
on bottom & 1/2 up the sides, carbon steel legs, kettle is 4' ID x
43" deep, National ED #90469, overall 7.5' high |
|
51082p- |
200 gallon
Greerco, Triple Motion agitated "Agi Mixer" 316 stainless steel
sanitary contact surfaces, jacketed kettle National Board rated 1280
for 90 PSI at 330º F, scraper agitator, counter rotating baffles
feature spring loaded Teflon scraper blades & mounting pins for
secondary scraper blade set arranged as following or opposed
direction blades all driven by US Motors 5 HP variable speed drive,
Underwriters Laboratory certified for hazardous locations under
Class I Group D & Class II Groups F & G |
|
54802p- |
200 gallon
Dover Kettle model INA2200, 316 stainless steel, 100 PSI jacket at
338º F, gentle inclined single motion scraper agitation, 1.5 HP
3/60/208/230/460/1725 RPM gear head motor, 2" bottom center drain
16" from floor, 2/3 hinged lid, jacket on bottom & half up the
sides, carbon steel legs, 4' ID x 43" deep, 7-1/2' high overall,
National Board #90469 |
|
37577p- |
200 gallon
capacity Lee, Kettle full jacketed for 40 PSI, double motion scrape
agitation, 1.5" center bottom outlet, variable speed drive motor,
tilt out agitator with lift cylinder, stainless steel covers,
stainless steel product contact |
|
37570p- |
200 gallon
capacity Hamilton, Kettle, double motion scrape agitation, all
stainless steel, 4" bottom discharge, 45 PSI jacket |
|
37542p- |
200 gallon
capacity Groen, Kettle model DA200SP, single motion scrape with
baffles, stainless steel in & out, 4" bottom outlet with flush type
ball valve, 100 PSI jacket |
|
58650p- |
175 gallon
Fryma, Kettle, stainless steel construction, approximately 36"
diameter x 42" straight side, flat top with cover, cone bottom, top
entering 1.5 HP agitator drive with bottom & sidewall scrape,
jacketed tank on legs with 3" center bottom outlet |
|
46177p- |
150 gallon
Open Top Jacketed Kettle model DA150SP, 80 PSI at 650º F, stainless
steel 2/3 jacket, 42" diameter x 34" deep with 2" center bottom
outlet Acme bevel seat connection, mounted on 3 stainless steel pipe
legs with 6" x 6" pads, features a stainless steel bridge raised 10"
over center |
|
34120p- |
150 gallon
Lee, Tilting Kettle with stainless steel Jacket, rated at 125 PSI at
650º F, hydro tested at 250 PSI. National Board stamped, mounted in
carbon steel frame with water operated tilt cylinder, vessel is 42"
diameter x 35" deep offset flanged 2½" outlet, will accept standard
dual motion agitator, 2 piece loose fitting cover, 24" discharge
height. |
|
58043p- |
150 gallon
Lee, Steam Jacketed Kettle, double motion scrape surface, 44"
diameter x 36" deep stainless steel hemispherical bottom vessel with
pouring lip, mounted on painted steel A frame with pneumatic power
assist cylinder for the tilt to dump discharge, stainless steel
steam jacket manufacturer tagged for 100 PSI working pressure,
stainless steel tilt out agitator support bridge with pneumatic
agitator tilt out power assist cylinder, agitator has 5 HP 230/460
volt 3 phase constant drive with new drive gears & bearings on the
agitator, new scraper blades, new steam packing, steam jacket has
been hydrostatically pressure tested with no leaks |
|
51414p- |
150 gallon
Lee, Kettle, stainless steel with manual tilt, jacketed, rated for
90 PSI at 330º F, has carbon steel frame |
|
50925p- |
150 gallon
Lee, Kettle, open top, stainless steel, full jacket rated for 90 PSI
at 650º F, UM stamped, 2" outlet, mounted on stainless steel legs,
12" outlet height, 46" diameter |
|
21240p- |
150 gallon
Kettle, stainless steel contacts, tilt type with manual hand crank,
hot water jacket, 3" diameter discharge at bottom, kettle measures
35" diameter x 38" deep, mounted on legs, jackets have been patched
& repaired, not suitable for steam pressure on jacket. |
|
46159p- |
150 gallon
JC Pardo, Open Top Jacketed Kettle, food grade, all stainless steel
construction with polished finish, 42" diameter x 34" deep, 2"
center bottom discharge with NPT connection & 30" floor clearance,
National Board #2096, up to 125 PSI at 350º F, 4" wide heavy duty
brim ring on body to accommodate portable mixer mounting, half
stainless steel jacketed body, mounted on 4 low profile legs from
body sockets, vessel sits on stainless steel sub-frame on 4 load
cells |
|
46161p- |
150 gallon
JC Pardo, Jacketed Kettle, all stainless steel construction,
National Board #1816, 125 PSI at 350º F, 1.5" center bottom
discharge with tri clamp connection & 19" floor clearance, 4" wide
heavy duty brim ring, portable mixer mount & mounted on 4 fixed
stainless steel legs |
|
46180p- |
150 gallon
Hamilton, Open Top Sanitary Jacketed Kettle model SA, stainless
steel, 2/3 jacket 90 PSI test 154 PSI -20º F at 90 PSI, factory
tagged, 44" diameter x 33" deep, 2" center bottom outlet with tri
clamp connection at 24" discharge height, 60" overall height |
|
46163p- |
150 gallon
Hamilton, Open Top Jacketed Kettle, all stainless steel construction
with polished food grade finish, National Board #5684, 100 PSI at
328º F, 4 steam injector ports equally spaced around 3" center
bottom discharge with Acme bevel seat connection (male) with 26"
floor clearance, mounted on 3 stainless steel inter-connected fixed
legs, rolled vessel brim with opposed mounts for single or double
motion bridge mounted agitator, 48" x 48" x 68" H, approximately 500
pounds |
|
57149p- |
150 gallon
Hamilton, Kettle, all stainless steel, 40 PSI jacket, 1-1/2" side
bottom outlet |
|
57148p- |
150 gallon
Hamilton, Agitated Kettle, double motion scrape, stainless steel,
100 PSI jacket, 3" tri clamp discharge |
|
43316p- |
150 gallon
Groen, Spherical Single Motion Scrape Agitated Kettle model
INA150SP86770 features angled single motion scraper agitator bridge
with Sterling 2 HP variable speed drive with speed from 11.3 to 45
RPM maximum 230 volt 3 phase stainless steel jacket rated for 100
PSI, center bottom discharge with 26" floor clearance & Acme
threaded connection, 30" kettle top opening, mounted on 4 painted
steel thread in hip socket mounted legs with floor mounted flanges,
84" tall x 44" wide x 60" deep |
|
44450p- |
150 gallon
Groen, Process Kettle model N150A, stainless steel exterior open top
with 2 piece cover, 45 PSI rated jacket, 2" center bottom outlet, no
agitation, 42" diameter x 33" deep x 64" high on stainless steel
legs |
|
46175p- |
150 gallon
Groen, Paddle Agitated Sanitary Jacketed Kettle model N150, all
stainless steel construction, jacketed body rated for100 PSI, 10
blade paddle agitator from horizontal shaft with agitator contouring
to interior, driven hydraulic drive coupled to on shaft reducer, 42"
diameter x 34" deep, 4" center bottom discharge with 30" floor
clearance & Acme bevel seat connection, formerly used in prepared
foods |
|
51416p- |
150 gallon
Groen, Kettle model TADN150, measures 42" diameter x 36" deep, 3"
center bottom outlet but welded shut, jacketed rated for 100 PSI,
includes manual tilt mechanism with hand wheel, sweep agitation with
Teflon scrapers (less drive assembly) mounted on carbon steel frame |
|
55801p- |
150 gallon
Groen, Kettle model N250, jacketed, 316 stainless steel, National
Board #138867, hemispherical bottom, jacket has maximum working
pressure of 45 PSI at 300º F & minimum temperature of -20º F at 45
PSI, jacket has 1.75" NPT fitting on side & (2) 1.5" NPT fitting on
bottom, top has 1.5" sanitary tri clamp fitting with clean in place
(CIP) & (2) 1.5" sanitary tri clamp fitting, bottom has 2" sanitary
tri clamp center discharge, 48" diameter x 3" straight side x 24"
hemispherical bottom, 3 legs has an overall height of 48.5", 1
hinged lid |
|
19886p- |
150 gallon
Groen, Kettle model N150SP, 100 PSI jacketed on bottom & half way up
the sides, stainless steel legs, 2¼" bottom drain, 8½" wide bridge
on top with 4 inlets, no lids, all stainless steel, kettle is 35"
deep x 43" diameter. |
|
57537p- |
150 gallon
Groen, Kettle model DA150SP, stainless steel construction, 42"
diameter x 33" deep, 40 PSI at 300º F, National Board #27226, no lid |
|
46162p- |
150 gallon
Brighton Corp/Hamilton, Double Motion Open Top Jacketed Kettle, all
stainless steel food grade construction, standard factory jacked,
National Board #5801, 100 PSI at 328º F, 3" center bottom discharge
with 22" floor clearance, 4 internal steam injection ports
equilaterally spaced around discharge & externally piped from single
manifold, 44" diameter x 34" deep, rolled brim with 2 opposed
mounting for factory double or single motion agitator, mounted on 3
fixed legs |
|
46166p- |
150 gallon
BH Hubert, Open Top Sanitary Jacketed Kettle, stainless steel, 42"
diameter x 33" deep, National Board #5734, 100 PSI at 337º F,
mounted on 3 stainless steel legs, 2" center bottom outlet with NPT
connection & 12" discharge height, vessel dish has 21" radius, .312
inner head thickness & .156 outer head thickness |
|
46158p- |
150 gallon
BH Hubert & Son, Open Top Sanitary Jacketed Kettle, all stainless
steel construction with polished food grade finish, National Board
#6347, 100 PSI at 337º F, 42" diameter x 34" deep, 3" center bottom
discharge with tri clamp connection & 16.5" ground clearance, 21"
kettle shell radius, .187 body thickness, .312 bottom head
thickness, 4" wide stainless steel vessel brim ring with opposed
mounts for bridge, formally used in prepared foods |
|
46168p- |
150 gallon
BH Hubert & Son, Open Top Food Grade Jacketed Kettle, all stainless
steel construction, National Board #5857, 100 PSI at 337º F, mounted
on 4 body mounted fixed length stainless steel legs, 2" center
bottom outlets with sanitary tri clamp connection & 12" discharge
height, heavy duty brim ring on vessel body, stainless steel
portable mixer mount, 57" overall vessel height |
|
46160p- |
150 gallon
Allegheny Hancock, Open Top Jacketed Kettle, all stainless steel
food grade construction with polished finish, 44" diameter x 33"
deep, National Board #037, up to 125 PSI at 345º F & -20º F, 3"
center bottom discharge with tri clamp connection & 20" floor
clearance, rolled brim with 2 opposed mounts for bridge, 4 internal
steam injection ports offset equilaterally from center bottom
discharge port, mounted on 4 fixed legs from hip sockets |
|
57499p- |
130 gallon
Bendel, Kettle, 304 stainless steel construction, 30" diameter x 44"
straight side, flat top, dish bottom, 2" center bottom outlet,
jacket rated 150 PSI, with .33 HP 230/460 volt clamp on agitator,
tank mounted on base with load cells & scale, Chromalox self
contained electric heating system |
|
47838p- |
125 gallon
Vulcan Hart, self-contained Gas Fired Kettle model GT125, single
hinged lift top cover, 3" clamp outlet, needs work in the gas burner
(mild steel underside) area, product side (stainless steel topside)
looks great. |
|
54141p- |
125 gallon
Lee, Kettle, stainless steel, National Board #3090 & #3091, top of
kettle is single walled & bottom is jacketed, jacket rated for 125
PSI at 353º F, 36" diameter x 16" straight side x 18" dish depth,
41" overall height, open top, jacket has 1" threaded fittings,
interior has 3" center sanitary discharge, agitator not included |
|
55803p- |
125 gallon
Lee, Kettle, stainless steel, National Board #3021, top of kettle is
single walled, bottom is jacketed, jacket rated for 125 PSI at 353º
F, 36" diameter x 16" straight side x 18" dish depth, overall height
with agitator is 41", open top, jacket has 1" threaded fittings,
interior kettle has 3" center sanitary discharge |
|
34116p- |
125 gallon
Lee Metal Products, Open Top Jacketed Tilting Kettle, painted
A-frame stand with trunion mounted kettle & jacket piping, manually
operated tilting with worm drive & hand wheel, 1.5" center bottom
discharge with Acme threaded connection, 37" diameter x 34" deep
with full 2 piece hinged loose fitting cover, PM# 7953 |
|
46643p- |
125 gallon
Groen, Jacketed Kettle model TA125SP, center bridge with lift top
covers, double motion scraper agitation, 3" clamp outlet, stainless
steel legs with mounting pads, 45 PSI jacket, steam jacketed |
|
57054p- |
125 gallon
BH Hubert & Sons, Open Top Kettle, features stainless steel body &
jacket rated for 125 PSI, 38" diameter x 34" deep, 2" center bottom
discharge with NPT connection, 16" floor clearance, 2.5" heavy steel
angle iron brim is welded at kettle brim exterior, mounted on 4
interconnected legs, formerly used in cosmetic industry |
|
51411p- |
100 gallon
Legion, Kettle model LGB100, stainless steel, jacketed, rated for 30
PSI at 274º F, has temperature control, temperature gauge, on/off
switches, 2" center bottom discharge, 5" inlet/outlet on jacket,
National Board #17267, on legs |
|
34119p- |
100 gallon
Lee, Tilting Kettle model 100CWD, stainless steel sanitary, 36"
diameter x 30" deep, trunion mounted kettle in painted A-frame stand
on casters with water activated tilting cylinder with valve,
jacketed, fully insulated body, National Board #1992 for 55 PSI,
full vacuum at 300º F, Lee fluids flow 1½" flush seating sanitary
ball valve at center bottom with tri clamp connection, portable
mixer mount with 2 piece loose fit covers slotted for mixers with
sprayball, kettle pour spout |
|
44254p- |
100 gallon
Lee, Kettle model 868R, double motion scrape agitated, 100 PSI
jacket, 2.5" outlet, stainless steel product contact, mild steel
frame, tilt out agitator, gear head motor drive |
|
50324p- |
100 gallon
Lee, Kettle jacketed stainless steel construction, rated for 45 PSI
at 293º F, center bottom discharge, portable on wheels |
|
57151p- |
100 gallon
Kettle, stainless steel, 2" NPT outlet, tank only, jacket leaks |
|
57150p- |
100 gallon
John Lentz, Kettle, 2" NPT outlet, 90 PSI jacket, stainless steel
with mild steel legs |
|
19883p- |
100 gallon
Hubbert, Kettle stainless steel, 40 PSI jacketed, jacket is on the
bottom & half way up the side, side 2" drain 18" off the floor,
kettle is 3' diameter x 28" deep, includes hinged lid, overall size
is 50" high x 42" square. |
|
55643- |
100 gallon
Hamilton, Process Kettle model SA, stainless steel exterior, open
top, 150 PSI jacket, 2" center bottom outlet, no agitation, 42"
diameter x 30" deep, side bracket for mixer, currently 78" high on
extended legs, National Board #2752, lower legs available on request |
|
37556p- |
100 gallon
Hamilton, Kettle model A, 2" outlet with flush valve, National Board
#1311, 40 PSI jacket, all stainless steel single motion scrape
agitator, 2 HP motor |
|
57440p- |
100 gallon
Hamilton, Jacketed Kettle, jacket rated 90 PSI at 300º F |
|
56041p- |
100 gallon
Groen, Steam Jacketed Tilt Kettle model MW/DN/TA100SP, 36" diameter
x 31" deep hemispherical bottom stainless steel vessel with 2"
diameter bottom outlet (slightly offset), with tilt discharge &
pouring lip, stainless steel steam jacket manufacturer tagged &
National Board coded for 25 PSI steam pressure, twin shaft lift out
(with spring cylinder assist) agitator has a scraper & offset
vertical agitator, powered by 1.5 HP 230/460 volt 3 phase drive, on
tubular stainless steel support frame which has 45" infeed height &
30" fully tilted discharge height |
|
54086p- |
100 gallon
Groen, Scrape Agitated Kettle with pour lip, 50 PSI working
pressure, National Board #140401, single motion scrape agitator with
secondary bar type agitator, main agitator has 1 HP SEW gear head
motor & secondary agitator has 2 HP SEW gear head motor drive, both
drives are 230/460 volt 3 phase, 2" discharge with flush type ball
valve, equipped with hydraulic cylinder to lift agitator out, Rice
Lake weigh cells model RL35082N5-2.5Klbs, S/N AA156316, Weigh Tronix
WI127 touch pad controls, AB Pane View 1000 |
|
46169p- |
100 gallon
Groen, Open Top Food Grade Jacketed Kettle model N100, all stainless
steel construction, 36" diameter x 30" deep vessel, National Board
#130956, 100 PSI at 338º F, 2" center bottom outlet with tri clamp
connection & 14" floor clearance, mounted on 3 stainless steel hip
socket legs interconnected for stability, portable mixer mount top
bracket, 36" diameter x 29" deep x 54" high |
|
37541p- |
100 gallon
Groen, Kettle, stainless steel product contact, 2" center bottom
outlet, 40 PSI jacket, hinged cover |
|
57147p- |
100 gallon
Groen, Kettle, all stainless steel, 90 PSI jacket, 2" NPT outlet |
|
55800p- |
100 gallon
Groen, Kettle model RA100SP, jacketed, 316 stainless steel, National
Board #57877, kettle has hemispherical bottom, jacket has maximum
working pressure of 125 PSI at 353º F, jacket has (3) 1.25" NPT
fittings, top has agitator bridge with 3.25" agitator opening (no
agitator), 1" NPT fitting, 1.5" sanitary tri clamp fitting, 2"
sanitary tri clamp fitting, side has 2" sanitary tri clamp fitting,
bottom has 2" sanitary tri clamp center discharge, 36" diameter x
12" straight side x 18" hemispherical bottom, including 3 legs has
overall height of 62", (2) 1/3 hinged lids |
|
57145p- |
100 gallon
Groen, Kettle model N100SP, stainless steel, 100 PSI jacket, 2" NPT
outlet, National Board #37034 |
|
55757p- |
100 gallon
Groen, Kettle model N100SP, RA style agitation, 304 stainless steel,
2" bottom Tri Clamp outlet 14" from floor, jacket full bottom 1/2
way up the sides, 11" wide bridge with Boston reducer 1.5 HP
3/60/230/460/1700/ drive, final 32 RPM on agitator, RA style
agitator is single anchor type with 2 large baffles, kettle is 36.5"
diameter x 30.5" deep, carbon steel legs |
|
57146p- |
100 gallon
Groen, Kettle model N100SP, all stainless steel, 100 PSI jacket, 2"
NPT outlet, National Board #37036 |
|
58488p- |
100 gallon
Groen, Kettle model 100SP, 316 stainless steel construction,
jacketed for 100 PSI, double motion agitation, with Christmas tree
style & scraper agitation, tilt type, includes hydraulic tilt &
bottom discharge, driven by 3 HP 2150 RPM 550 volt 3/60 hertz, 4.3
amp motor |
|
38607- |
100 gallon
Groen, Jacketed Kettle model TA100, open top, 3" clamp outlet,
stainless steel legs with mounting pads, 45 PSI jacket |
|
38608p- |
100 gallon
Groen, Jacketed Kettle model TA100, center bridge with double motion
scraper agitation, 45 PSI jacket, stainless steel legs with mounting
pads, agitator drive 1.5/.75 HP, 208/3 phase/60, 3" outlet pod, no
ferrule or valve, welding of clamp or bevel seat outlet ferrule
included in reconditioned price, flush mount outlet valve would be
priced upon application |
|
47452p- |
100 gallon
Dual Kettle, stainless steel, one 30" diameter x 28" deep jacketed
kettle & one 24" diameter x 24" deep jacketed kettle, pneumatically
driven agitators, mounted on common base which are detachable |
|
56037p- |
100 gallon
Cleveland, Steam Jacketed Tilt Kettle, 36" diameter x 30" deep
hemispherical bottom, T316 stainless steel, 2" center bottom outlet,
with manual crank tilt to dump mechanism, with pour lip, stainless
steel steam jacket, manufacturer tagged & National Board coded for
50 PSI, on stainless steel legs set at 47" infeed height, 12"
discharge height from bottom outlet, +/- 7" discharge from the pour
spout in full tilt position, no agitator |
|
58487p- |
95 gallon
Royce Parker, Jacketed Kettle, stainless steel, steam jacketed, 33"
diameter x 26" deep, 1.5" bottom side discharge, 2 electric heaters,
2 Kw 208 volt single phase, dish bottom, lid, temperature range of 0
to 250º F, on 3 legs 3.5" diameter x 12" tall |
|
33715p- |
80 gallon
Vulcan Hart, Kettle model GL80, self-contained, gas fired, side
bottom outlet, no lid, no agitator, 33" inside diameter x 36-3/8"
outside diameter, 42" tall overall, 2-3/4" side outlet drain, depth
at bottom of drain 2' depth at shallow end 1' 3-1/2". National Board
#4169, needs new burners |
|
39882p- |
80 gallon
Legion, Kettle model LGB80, top lift lid, vertical, bottom dish,
cylindrical shaped, 1.5" outlet, stainless steel exterior, 53" high
x 39" diameter overall dimensions |
|
52370p- |
80 gallon
Lee, Kettle, stainless steel, hemispherical bottom, jacket rated 40
PSI at 300º F, agitator mounting bracket, National Board #1552 |
|
37589p- |
80 gallon
Lee, Kettle stainless steel with mild steel jacket & legs, 40 PSI
jacket, 1.5" outlet NPT, jacket needs repair |
|
57938- |
80 gallon
Lee, Kettle model D9MT, jacketed, steam, tilt out double motion
scraper agitation, 40 PSI jacket, 3" Q line outlet, stainless steel
legs |
|
44256p- |
80 gallon
Lee, Kettle double motion scrape agitated, tilt out agitator, 100
PSI jacket 2" outlet, gear head motor drive, mild steel frame,
stainless steel product contact |
|
48635p- |
80 gallon
Lee, Double Motion Scrape Agitated Kettle, 2.5" bottom outlet,
stainless steel product contact, mild steel frame, tilt out double
motion scrape agitator with gear head motor drive, 90 PSI jacket |
|
44255p- |
80 gallon
Lee, Double Motion Scrape Agitated Kettle, 2.5" bottom outlet,
stainless steel product contact, mild steel frame, tilt out
agitator, gear head motor drive, 90 PSI jacket |
|
51395p- |
80 gallon
Kettle, stainless steel, self-contained, jacketed, no rating
available, has 1.5" side bottom discharge, 2" threaded inlet/outlet |
|
55644- |
80 gallon
Hos. Burkhart, Process Kettle, stainless steel exterior, 6718521
T150, 15 PSI rated jacket, 39" diameter, 2" center bottom outlet,
30" high on legs |
|
57541p- |
80 gallon
Hamilton, Jacketed Kettle, all stainless steel construction, double
motion agitation, driven by 1.5 HP, 230/460 volt motor with
start/stop control, center agitation with scraper type agitation,
includes the Teflon scrapers, hinged cover & tilt out agitation |
|
38609p- |
80 gallon
Groen, Steam Kettle model DTA-3-08, tilting double motion scraper
agitation with pouring lip, less scraper blades, stainless steel
tubular base, 45 PSI jacket |
|
53586p- |
80 gallon
Groen, Process Kettle model 80, stainless steel exterior, shallow
bottom, 25 PSI 300º F rated jacket, 1.5" side bottom outlet, no
agitation, pedestal mount, 40" ID x 22" deep x 35" high, National
Board #29503 |
|
36203p- |
80 gallon
Groen, Kettle hemispherical bottom, National Board #68813, 26"
straight wall height, 26" diameter, jacket rated 100 PSI at 338º F,
6-1/2" bottom center discharge, 2 HP side scraping agitator, 230/460
vac 3 phase |
|
37586p- |
80 gallon
capacity Hamilton, Kettle model A, National Board #4442, stainless
steel with mild steel legs, 40 PSI jacket, 2" outlet NPT |
|
43495p- |
80 gallon
capacity Hamilton, Kettle model A, National Board #4120, 40 PSI
jacket, 2" outlet NPT, stainless steel kettle with mild steel legs |
|
49490p- |
75 gallon
Toronto Coppersmith, Tilt to Dump Steam Jacketed Kettle, with double
motion scrape agitation, 28" diameter x 28" deep, stainless steel
vessel with stainless steel steam jacket manufacturer tagged for 100
PSI working pressure, hand crank tilt to dump mechanism, has pour
lip discharge, mounted on painted steel A Frame, tip out double
motion scrape agitator is mounted on painted steel support bridge
with pneumatic power assist, powered by 2 HP 460 volt 3 phase drive
motor with variable speed control |
|
35799p- |
75 gallon
Open Top Jacketed Kettle, aluminum, 32" diameter x 29" deep with
1.5" center bottom discharge with 18" floor clearance, NPT
connection, 3 jacket inlets mounted on 3 interconnected aluminum
legs with screw down feet. |
|
52640p- |
75 gallon
Kettle, stainless steel lined open top, 30" diameter x 30" deep,
standard half jacket, 1.5" center bottom discharge, mounted on 3
interconnected legs, 24" discharge height, stainless steel interior
with food grade polished finish & painted steel exterior, 60"
overall height, formerly used in cosmetic manufacturing |
|
54085p- |
60 liter
capacity Technogel, Agitated Kettle model Bollitore L60, stainless
steel, scrape agitator is single motion with bottom drive, auxiliary
prop type mixer, 1.5" side bottom outlet, stainless steel cover, no
pressure tag |
|
52825p- |
60 liter
capacity Technogel, Agitated Kettle model Bollitore L60, stainless
steel, scrape agitator is single motion with bottom drive, auxiliary
prop type mixer, 1.5" side bottom outlet, stainless steel cover, no
pressure tag |
|
13860p- |
60 gallon
Legion, Kettle stainless steel exterior, open top, 1.5" outlet, 45
PSI rated jacket, on 3 stainless steel legs, 30" diameter x 27" deep
x 48" high |
|
32118p- |
60 gallon
Lee, Tilting Kettle, hemispherical bottom, 90 PSI maximum jacket
pressure, 330º F maximum jacket operating temperature, stainless
steel, double motion side & bottom scrape agitation, 220/440 vac 3
phase 60 Hz 1.5 HP variable speed agitator, minimum 88 RPM, maximum
190 RPM |
|
21261p- |
60 gallon
Kettle, stainless steel, perforated basket |
|
37588p- |
60 gallon
Hamilton, Kettle model SA60, stainless steel double motion scrape
agitated, stainless steel legs, ¾ HP variable speed drive, 39/155
RPM 220 volt 3 phase, 1.5" center bottom outlet with bevel seat
sanitary connections, tilt out agitator, 125 PSI jacket, National
Board #2829, was used sparingly in an R & D laboratory. 55” x 34” x
72” tall. |
|
58684p- |
60 gallon
Hamilton, Kettle Mixer, unit designed to fit in approximately 60
gallon kettle, 5 HP, 220 volt only, 3 phase, RPM 11.6 to 116,
stainless steel sanitary wetted parts, agitator dimensions 34"
diameter x 24" deep, equipped with single motion scraper agitator
and two turbine style secondary agitators |
|
52828p- |
60 gallon
Groen, Single Motion Kettle model RA60, scrape agitated, with
baffle, National Board #138236, type 316 stainless steel, 45 PSI
jacket, 1/2 HP 230/460 volt motor with 14 final RPM |
|
54797p- |
60 gallon
Groen, self-contained Kettle, gas for heating, 198,000 BTU,
stainless steel |
|
35019p- |
60 gallon
Groen, Kettle, carbon steel, 33" diameter, jacketed for 40 PSI, 1"
center bottom discharge, has stainless steel cover welded on top |
|
55499p- |
60 gallon
Groen, Kettle model TA60, twin agitated, mounted on three painted
legs, 1/2 jacket, 100 WP PSI tagged, features US 1 HP 220/440/3 gear
head drive with factory gear box, Tri Clover Ladish 3" diameter
discharge, slightly recessed, supplementary TA agitator requires
blade |
|
11110p- |
60 gallon
Groen, Kettle model FT60, stainless steel legs, bottom side drain
1.5", stainless steel bridge at the top, inside is 26" diameter x 30
diameter, jacketed half way down, 40 PSI at 300º jacket. |
|
9600p- |
60 gallon
Groen, Kettle model DT60, tilt discharge, all stainless steel, half
up the sides full bottom jacket at 25 PSI at 300º F, with crank &
pouring spout, stainless steel frame, bottom side drain, no cover,
can be drained by center drain or tilted by hand crank, overall size
46" high x 4' wide x 38" deep, we hydro the jacket before shipment |
|
57539p- |
60 gallon
Groen, Jacketed Kettle model PT60SP, 30" diameter x 24" deep,
stainless steel construction, jacketed for 25 PSI at 300º F, 1-1/2"
side bottom outlet, mounted on stainless steel base, National Board
#21311, #19071 & #19072, mounted on stainless steel base |
|
21252p- |
60 gallon
Dover, Kettle model N60, 316 stainless steel, non tilt, jacketed
(damaged) rated 50 PSI at 300º F, has hinged cover with 2½" top
inlets, flat bottom with 1½" center bottom outlet, portable on legs,
last used in pharmaceutical operation |
|
37580p- |
60 gallon
capacity Vulcan Hart, Jacketed Kettle model KL60, stainless steel
with cover, side bottom outlet |
|
56065p- |
60 gallon
capacity Lee, Kettle, stainless steel contacts, complete with side &
bottom scraper agitation, manual tilt type kettle, jacketed for 90
PSI at 330º F |
|
38473p- |
60 gallon
capacity Groen, Kettle model HH260, 45 PSI, self-contained natural
gas fired, side bottom discharge, National Board #65670, stainless
steel product contact, controls need work (new wiring & contacts
needed) |
|
35800p- |
50 gallon
Open Top Jacketed Kettle, aluminum, 32" diameter x 22" deep, 1.5"
center bottom outlet, NPT connection, 14" floor clearance, 3
interconnected legs, 3 jacket inlets, adjustable feet, 1 piece loose
fitting cover. |
|
46181p- |
50 gallon
Hamilton, Open Top Jacketed Kettle, 125 PSI at 345º F, 32" diameter
x 22" deep, 2" sanitary tri clamp connection, mounted on 3 stainless
steel legs, 56" overall height |
|
57441p- |
50 gallon
Hamilton, Jacketed Kettle, double motion, jacket rated 60 PSI at
293º F, National Board #2819 |
|
49017p- |
40 quart
Groen, Tilt Kettle model TDB740, self-contained, 480 volts, 50 PSI
jacket at 300º F maximum |
|
52686- |
40 quart
Groen, Kettle model TDB740, stainless steel, self-contained
electrically heated, with pouring lip & tilt out double motion
agitation with scraper blades, jacket rated 50 PSI at 300º F,
480/3/60 12 Kw electrics |
|
55554p- |
40 quart
Groen, Kettle model TDA140, maximum pressure 60 PSI at 325º F,
National Board #128096 |
|
37550p- |
40 quart
capacity Groen, self-contained Kettle model TDB740, electric fired,
50 PSI operating pressure, National Board #86718, tilt type, 440
volt 3 phase, unit is good working condition, last used unknown,
transformer can be rewired, heaters would have to be changed |
|
55061p- |
40 quart
(10 gallon) self-contained Kettle model TB/740, electric, 304
stainless steel, steam jacketed, tilts with spout, temperature range
is 150º F to 265º F, jacket rated at 50 PSI at 300º F, requires 240
vac single phase electrical supply |
|
37583- |
40 gallon
Vulcan Hart, Kettle model GT40, 15 PSI, self-contained gas fired,
side bottom discharge, National Board #16264 |
|
37581p- |
40 gallon
Vulcan Hart, Kettle model GS40, low pressure jacket, stainless steel
product contact, 1.5" side bottom outlet, 38" x 40" high,
approximately 300 pounds. |
|
41234p- |
40 gallon
Open Top Kettle, jacketed stainless steel sanitary, fully insulated
with polished aluminum exterior, jacket is in house tested to 15
PSI, 1.5" center bottom discharge with tangential front bottom
outlet, NPT connections, 19" floor clearance, mounted on 3 fixed
carbon steel legs, 26" diameter x 22" deep. |
|
38257p- |
40 gallon
Open Top Jacketed Sanitary Kettle, stainless steel, vessel body is
fully insulated with polished aluminum exterior jacket is in house
tested to 15 PSI 1.5" center bottom discharge with tangential front
bottom outlet NPT connection, 19" floor clearance mounted on 3 fixed
carbon steel legs 26" diameter x 22" deep |
|
53819p- |
40 gallon
Moffat, Kettle model ELT40, open top, vertical orientation, dish
bottom, cylindrical shape, electric jacket, stainless steel
exterior, 40" high x 39" wide x 34" long overall dimensions |
|
13705p- |
40 gallon
Market Forge, Kettle model MT40, stainless steel, 30 PSI, in
cabinet, steam jacket |
|
49488p- |
40 gallon
Legion, Jacketed Tilt Kettle, all stainless steel, 25.5" diameter x
24" deep vessel with ASME & National Board coded 40 PSI jacket,
manual crank tilt to dump, 1.25" side bottom outlet, kettle sits in
stainless steel cabinet at 42" high infeed height, cabinet is
equipped with makeup waterspout |
|
44851p- |
40 gallon
Lee, Open Top Kettle, with jacket National Board #1758 for 40 PSI at
300º F hydro tested by manufacturer to 68 PSI 25" diameter x 22"
deep with 2" center bottom outlet with tangential front bottom
discharge with NPT connection & 18" floor clearance mounted on 3
carbon steel legs from hip socket mountings |
|
35789p- |
40 gallon
Lee, Open Top Kettle, stainless steel sanitary, National Board rated
for 40 PSI at 300º F, hydro tested to 60 PSI, 1.5" center bottom
outlet with tangential front bottom outlet, 18" floor clearance with
Acme bevel seat connection, 26" diameter x 22" deep, mounted on 3
carbon steel hip socket legs. |
|
35791p- |
40 gallon
Lee, Open Top Kettle, stainless steel sanitary, mounted on 3 hip
socket legs, half jacket, National Board rated for 40 PSI at 300º F,
26" diameter x 22" deep, 1.5" center side tangential discharge. |
|
38255p- |
40 gallon
Lee, Open Top Kettle model 40A, stainless steel sanitary, 1/2 jacket
rated for 40 PSI at 287º F jacket is National Board #4167 26"
diameter x 22" deep mounted on 3 hip socket legs 1.5" center bottom
discharge Sani female connection |
|
35788p- |
40 gallon
Lee, Open Top Jacketed Kettle, stainless steel jacket National Board
rated for 40 PSI at 300º F, hydro tested to 68 PSI, 26" diameter x
22" deep with 1.5" center bottom discharge with tangential front
bottom outlet, 18" floor clearance & Acme bevel seat connection,
mounted on 3 steel legs with hip socket mountings. |
|
35787p- |
40 gallon
Lee, Open Top Jacketed Kettle, stainless steel jacket National Board
rated for 40 PSI at 300º F, hydro tested to 60 PSI, 26" diameter x
22" deep with 1.5" center bottom discharge with tangential front
bottom outlet, 18" floor clearance & Acme bevel seat connection,
mounted on 3 steel legs with hip socket mountings. |
|
35786p- |
40 gallon
Lee, Open Top Jacketed Kettle model 40D, fully jacketed body
National Board rated for 40 PSI at 287º F, down to -20º F at 40 PSI,
vessel is mounted in cylindrical shroud with polished stainless
steel exterior & insulated body, dual 1.5" center bottom discharge
with tangential front bottom outlets with NPT connections, 20" floor
clearance, set at 90 degrees to each other, flush seating internal
temperature well, portable clamp type mixer mounting, set on 3
stainless steel legs. |
|
35790p- |
40 gallon
Lee, Open Top Jacketed Kettle model 40A, National Board rated jacket
for 40 PSI at 287º F, hydrostatically tested at 68 PSI, 1.5" center
bottom outlet with tangential front discharge, NPT connection, 18"
floor clearance, mounted on 3 stainless steel legs from hip socket
mountings |
|
35780p- |
40 gallon
Lee, Open Top Jacketed Kettle model 40A, National Board #4477 rated
for maximum of 40 PSI at 287º F, minimum of -20º F at 40 PSI, 25"
diameter x 22" deep, 1.5" center bottom discharge with tangential
front outlet with female Acme threaded connection, 17" floor
clearance, mounted on 3 stainless steel legs from hip socket
mountings |
|
35778p- |
40 gallon
Lee, Jacketed Kettle, stainless steel, National Board rated jacket
40 PSI at 300º F, test pressure 68 PSI, 1.5" center bottom outlet
with tangential front discharge NPT 18" floor clearance, 3 carbon
steel legs from hip socket mounts, 26" diameter x 22" deep. |
|
37194p- |
40 gallon
Lee, Jacketed Kettle model 40D, rated for 40 PSI at 287º F, -20º F
at 40 PSI, 25" diameter, 23" deep, flush internal temperature well,
1.5" center bottom outlet with tangential outlet with NPT connection
with 9" floor clearance, kettle is housed in cylindrical body with
polished stainless steel shroud |
|
58651p- |
40 gallon
Lee, Double Motion Kettle,316 stainless steel construction, 29.5"
diameter x 23" deep hemispherical bottom, open top with cover,
double motion agitator with sidewall scrape driven by 1 HP motor,
jacketed for 90 PSI at 332º F, tilt out agitator with cylinder on
stainless steel legs, 1.5" bottom outlet, National Board #9965, CRN
#OH2225.6 |
|
58657p- |
40 gallon
Lee Industries, Tilting Kettle, paddle agitated, 26" diameter x 21"
deep, equipped with single whip style agitation, 125 PSI 1/2 jacket,
250 PSI test, 54 gallon total capacity with 40 gallon working
capacity, 45" high, a frame stand with air operated tilt out
agitator, tilt discharge approximately 24" |
|
54433- |
40 gallon
Kettle, stainless steel exterior, open top, 25" diameter x 20" deep
x 37" high, 15 PSI rated jacket, 2" NPT center bottom outlet, on 3
stainless steel legs |
|
21249p- |
40 gallon
Kettle, carbon steel contact parts, agitated with top hinged cover,
jacketed for 15 PSI maximum, has 1" center bottom discharge |
|
57053p- |
40 gallon
Kettle, 33" diameter ID x 16" deep with 2" CB outlet 18" discharge
height mounted on carbon steel 3 leg reinforced stand with
interconnected legs, jacket (no tag visible) features rolled brim
with top steel ring connected to legs |
|
35795p- |
40 gallon
Kettle, 25.5" diameter x 23" deep, mounted on 3 stainless steel legs
with leveling features, 1.5" tangential discharge threaded 18"
discharge height, unit features insulated shroud around entire unit
Lee tagged 42" overall height. |
|
35784p- |
40 gallon
Hamilton, Open Top Jacketed Kettle model SA, stainless steel, jacket
for 40 PSI at 287º F, hydro tested to 67 PSI, 1.5" center bottom
outlet with tangential front discharge, 18" floor clearance, NPT
connection mounted on 3 stainless steel legs with hip socket
mountings, National Board #5882 |
|
26751p- |
40 gallon
Groen, Vertical Cylindrical Kettle model AE40, stainless steel
exterior, top lift lid, dish bottom, dimpled jacket, 1.5" outlet
valve, overall 49" high x 36" diameter |
|
50164p- |
40 gallon
Groen, Tilting Kettle model D40, stainless steel sanitary, jacketed
body National Board #51920 rated for 25 PSI at 300º F, 27" diameter
x 22" deep, 40" overall height, manually operated tilt, mounted on 3
legged stainless steel stand, steam inlet & outlet through mounting
Trunion, loose fitting 2 piece hinged cover, formerly used in
cosmetic manufacturing |
|
53059p- |
40 gallon
Groen, Steam Jacketed Kettle model PT40, stainless steel, 26"
diameter x 22" deep hemispherical bottom vessel, 2" front bottom
outlet, stainless steel steam jacket manufacturer tagged & National
Board coded for 25 PSI working pressure, pedestal base, 1 piece
hinged stainless steel cover |
|
56665- |
40 gallon
Groen, Open Top Kettle model N40, stainless steel exterior, 1-1/2"
center bottom outlet, 40 PSI rated jacket, 19" diameter x 17" deep x
36" high, on mild steel legs |
|
36315p- |
40 gallon
Groen, Open Top Jacketed Kettle, stainless steel, carbon steel body,
jacket with stainless steel clad interior with polished finished
jacket rated for 40 PSI working pressure, 1.5" center bottom
discharge with NPT "T" welded directly to bottom discharge with 17"
floor clearance, 26" diameter x 22" deep, loose fitting 2 piece
cover |
|
35797p- |
40 gallon
Groen, Open Top Jacketed Kettle, stainless steel, 80% jacketed body
rated for 40 PSI, 31" diameter x 18" deep, with NPT connection, 18"
floor clearance, portable mixer mount, rolled sanitary brim, mounted
on 3 interconnected legs. |
|
21250p- |
40 gallon
Groen, Kettle stainless steel, unit was jacketed for 40 PSI the
jacket leaks, kettle is tilt with handle & has perforate basket. |
|
42185p- |
40 gallon
Groen, Kettle model TDB440, National Board #71341, stainless steel,
50 PSI jacket, self-contained electric fired, tilt type, 280 volt 60
cycle 3 phase |
|
32192p- |
40 gallon
Groen, Kettle model PT40, 30 PSI jacket, all stainless steel,
pedestal base, side 1.5" drain, 30 PSI at 300º F, jacket, 26"
diameter x 24" deep, no lid, overall 37" high x 30" square |
|
37549p- |
40 gallon
Groen, Kettle model DEE440, self-contained electric fired, 3 phase
60 cycle, 30 PSI, tilt type with pour lip |
|
41257- |
40 gallon
Groen, Kettle 40 PSI, side bottom discharge with lid, stainless
steel legs, National Board #33807 |
|
29181- |
40 gallon
Groen, Jacketed Kettle, hemispherical bottom, one piece removable
lid, 1.5" outlet, 25" inside diameter x 22" deep, mounted on 21"
stainless steel legs. |
|
57538p- |
40 gallon
Groen, Jacketed Kettle model 40WP, 30" diameter x 20" deep, hinged
top cover, mounted on stainless steel base, 1-1/2" side bottom
outlet |
|
54028p- |
40 gallon
Groen, Gas Fired Cooking Kettle model AH140, stainless steel, 26"
diameter x 21.5" deep stainless steel hemispherical bottom vessel
with 1.5" bottom side discharge outlet with valve, stainless steel
steam jacket manufacturer tagged & National Board coded for 50 PSI,
with self contained/integral gas fired heater/boiler, jetted to burn
natural gas, but could be re-jetted for propane, complete with
stainless steel exterior shrouding, hinged top cover, & operator
thermostat control |
|
54027p- |
40 gallon
Cleveland, self-contained Gas Fired Kettle model KGL40, 26" diameter
x 24" deep hemispherical bottom jacketed stainless steel vessel with
2" side bottom discharge outlet with discharge valve, sanitary food
grade stainless steel product construction, including stainless
steel product contacts, exterior shrouding & hinged stainless steel
top cover, complete with operator thermostat & activation controls,
steam jacket manufacturer tagged & National Board coded for 50 PSI
working pressure, with self contained/integral gas fired
heater/boiler, control circuit & electronic ignition powered by 110
volt single phase |
|
57052p- |
40 gallon
Cleveland, Open Top Kettle model KDL40F, sanitary, features 80%
jacketed body, National Board rated (#18687) for 50 PSI at 298º F
with minimum jacket temperature of 32º at 50 PSI, built in Canada,
CRN #6464.5, 33" diameter x 19" deep with 2" center bottom outlet,
NPT connection & 18" floor clearance mounted on 3 stainless steel
legs |
|
36313p- |
40 gallon
Cleveland, Open Top Jacketed Sanitary Kettle model KDL40F, 80%
jacketed body, National Board rated for 50 PSI at 298º F, with
minimum jacket temperature of 32º F at 50 PSI, 33" diameter x 19"
deep with 2" center bottom outlet, NPT connection, 18" floor
clearance mounted on 3 stainless steel legs |
|
35794p- |
40 gallon
Cleveland, Open Top Jacketed Sanitary Kettle model KDL40F, 80%
jacketed body, National Board #18687 rated for 50 PSI at 298º F,
with minimum jacket temperature of 32º F at 50 PSI, 33" diameter x
19" deep with 2" center bottom outlet, NPT connection, 18" floor
clearance, mounted on 3 stainless steel legs |
|
51083p- |
40 gallon
Cleveland, Jacketed Sanitary Kettle model KDL40F, open top, 80%
jacketed body, National Board #18687 for 50 PSI at 298º F with
minimum jacket temperature of 32º at 50 PSI, 33" diameter x 19" deep
with 2" center bottom outlet, NPT connection & 18" floor clearance
mounted on 3 stainless steel legs |
|
38981p- |
40 gallon
Cleveland, Cooking Kettle model KGM40, stainless steel,
self-contained gas, 26" diameter x 24" deep, rated for 25 PSI at
267º F, stainless steel cover, 2" discharge, unit is 115 volt,
single phase steam cooker, National Board #19491 |
|
37544p- |
40 gallon
capacity Groen, Kettle model AH140, self-contained gas fired, 30
PSI, stainless steel product contact, single phase, controls are old
& will need replaced |
|
46396p- |
30
gallon/120 liter Coulter, Tilt Kettle model UM120, stainless steel
product contact, 90 PSI jacket, tilt with pour lip & cover, mild
steel frame with casters |
|
35783p- |
30 gallon
Open Top Jacketed Kettle, stainless steel, vessel body has been
fully insulated & shrouded in aluminum, will pressure test jacket to
15 PSI, 1.5" center bottom discharge with tangential outlet to dairy
metal plug valve with 18" floor clearance, mounted on 3 stainless
steel legs, 24" diameter x 20" deep. |
|
51424p- |
30 gallon
Legion, Kettle model CSPECLGC, stainless steel construction,
self-contained, bowl measures 23" diameter x 18" deep, hemispherical
bottom, includes 1.5" side bottom outlet, gas fired unit, natural
gas, rated for 110,000 BTU per hour |
|
51234p- |
30 gallon
Kettle, stainless steel with carbon steel outside including jacket,
kettle is 2 feet deep 29" in diameter, jacketed bottom & 1/2 up
sides, 1.5" drain 17" from floor, this is a chemical grade kettle,
low pressure jacket, overall 4 foot high x 30" square. |
|
54892p- |
30 gallon
Jacketed Kettle, stainless steel lined, open top, 1.5" center bottom
discharge, mounted on 3 interconnected legs, 16" discharge height,
36" overall height, stainless steel clad interior has polished food
grade finish, formerly used in cosmetic industry, will pressure test
jacket for low PSI service |
|
49485p- |
30 gallon
Groen, Steam Jacketed Kettle model PT30, stainless steel, 26"
diameter x 22" deep vessel, with 1.5" center bottom outlet,
stainless steel steam jacket manufacturer tagged for 40 PSI working
pressure, pedestal base, 2 piece hinged stainless steel cover |
|
54026p- |
30 gallon
Groen, self-contained Electric Fired Kettle model EE30, stainless
steel, 24" diameter x 20" deep hemispherical vessel with 1.5" front
bottom outlet with valve, complete with hinged top cover, 34" infeed
height, 12" discharge height, steam jacketed, manufacturer tagged &
National Board coded for 30 PSI, electrically heated with 208/230
volt 3 phase electrical input |
|
57056p- |
30 gallon
Groen, Open Top Kettle model N30SP, features sanitary food grade
construction, stainless steel jacket rated for 45 PSI at 300º F,
full loose fitting 2/3 hinged cover with mixer shaft slot, portable
clamp type mixer mounting bracket on vessel exterior sidewall, 24"
diameter vessel x 20" deep, 1-1/2" center bottom outlet with
removable pneumatic flush seating valve with 20" discharge height,
mounted on 4 stainless steel legs from hip sockets interconnected on
3 sides, formerly used in cosmetics |
|
58649p- |
30 gallon
Groen, Kettle, stainless steel, approximately 24" diameter, open
top, hemispherical bottom, jacketed for 75 PSI, tilt discharge, on
stand |
|
9599- |
30 gallon
Groen, Kettle, jacketed half way on sides, full jacket on bottom,
pedestal base, stainless steel, 1.5" side drain, hinged lid, overall
size 38" high x 32" wide. |
|
11105p- |
30 gallon
Groen, Kettle model AH130, self-contained steam jacket, gas fired,
stainless steel bottom side drain, natural gas, single phase, 60
hertz, 115 volt electric, maximum steam pressure of 30 PSI at 300º
F, input rating on gas is 85,000 BTU's, hinged 1 piece cover,
overall size 37" diameter x 42" high. |
|
45195p- |
28 gallon
Precision Stainless, Kettle 316L stainless steel construction 1.5"
top inlet 2" bottom drain hinged lid casters |
|
53354p- |
25 gallon
Wage Electric, Melting Kettle, open top, electric, aluminum vessel,
19" diameter x 24" deep with flat sloped bottom to 1" manually
operated dispensing valve with 12" clearance under vessel, 60-250º F
operating temperature, 1/3 HP centrally mounted agitator with zero
maximum variable speed drive & paddle agitator, painted steel
exterior |
|
54889p- |
25 gallon
Waage Electric Corp., Melting Kettle, open top, electric, aluminum
vessel, 19" diameter x 24" deep with flat sloped bottom to 1"
manually operated dispensing valve with 12" clearance under vessel,
60º to 250º F operating temperature, 1/3 HP centrally mounted
agitator with zero-max variable speed drive & paddle agitator,
painted steel exterior, 24" wide x 44" high overall dimensions,
formerly used for cosmetic industry |
|
36670p- |
25 gallon
Vertical Cylindrical Kettle, lift lid top, dish bottom, atmospheric
jacket, 1.5" tri clamp outlet, copper exterior, 50" height x 24"
diameter overall dimensions |
|
26742p- |
25 gallon
Market Forge, Vertical Cylindrical Kettle model MT25, top lift lid,
dish bottom, 1.5" outlet, stainless steel jacket, dimpled jacket,
40" high x 36" wide x 36" long overall dimensions |
|
57250- |
25 gallon
Legion, Kettle, U shaped, open top, dish bottom, atmospheric jacket,
1.5" BW outlet, stainless steel exterior, 36" diameter x 44" height
overall dimensions |
|
40660p- |
25 gallon
Lee, Open Top Jacketed Kettle, half stainless steel jacket rated for
90 PSI at 650º F, hydrostatically tested to 180 PSI, 24" diameter x
18" deep, 1.5" center bottom discharge with NPT connection, 14"
floor clearance & pack gland collar, mounted on 3 interconnected
painted steel legs |
|
52379p- |
25 gallon
Lee, Jacketed Kettle model D, stainless steel, with D9MT agitator,
double motion with counter rotation, 90 PSI at 330º F, Motortronics
K3-401 electronic speed controller, Sterling 1 HP vari speed drive |
|
46983p- |
25 gallon
Kettle, top has a lift lid, vertical, dish bottom, cylindrical
shaped, 1.5" BW outlet, stainless steel exterior, over all
dimensions are 24" wide x 26" long |
|
56843p- |
25 gallon
Cleveland, Open Top Kettle model KGL25T, tilting, all stainless
steel USDA approved design, set up for heating with natural gas (can
operate with propane), self-contained design, center bottom
discharge with tangential outlet & front 2" valve, pouring lip, 115
volt required for gas controls solid state ignition, mounted on 4
stainless steel legs with rear burner exhaust hood, National Board &
Canadian Board certified stainless steel jacket (#69110) rated for
50 PSI at 298º F, National Board stamped U & W, vessel is 21"
diameter x 20" deep with manually operated tilt with self locking
mechanism, mounted water valve on frame with spout required, vessel
jacket is pressure tested good & some minor mechanical repairs are
needed, has top 1 piece cover with handle, formerly used in food
service |
|
34656p- |
20 quart
Groen, Steam Kettle model TDB720, self-contained, electrically
heated, open top, tilting with pouring lip, 50 PSI rating, 208/3/60,
3 kilowatt, crate size 26" l x 17" w x 26" h weighs 100 pounds. |
|
52544- |
20 quart
Groen, Kettle model TDB720, stainless steel, self-contained
electrically heated tilting Kettle with pouring lip & tilt out
single motion agitation with scraper blades. Jacket rated 50 PSI at
300º F., 240/1/60, 6.1kw electrics |
|
51319- |
20 quart
Groen, Electric Kettle model TB720, 304 stainless steel,
self-contained, steam jacketed, tilts with spout, temperature range:
150º F to 265º F, jacket rated at 50 PSI at 300º F, National Board
#15047, requires 240 vac, single phase electrical supply |
|
41187p- |
20 quart
Dover Groen, Kettle model TDC220, 45 PSI 300º F jacket, National
Board #40600, tilt type, all stainless steel construction, USDA
approved |
|
31299p- |
20 quart &
40 quart Groen, Twin Kettle Package, stainless steel exterior,
kettles are tilt design & mounted on a stainless steel rinse drain
table, 40 quart kettle model TDA140, 16" diameter x 16" deep, 20
quart stainless steel kettle model TDC320, overall unit measures 4'
long x 2' wide x 4' high |
|
47623p- |
20 liter
Coulter, Steam Kettle model ETT2030430, self-contained, electrically
heated, tilting with pouring lip, 208/1/60 |
|
27755p- |
20 gallon
Vulcan Hart, Open Top Kettle, stainless steel exterior, 2" side
outlet, 12 PSI rated jacket, 21" diameter x 25" deep x 42" high,
tilt design on stainless steel support frame, model SL20T, National
Board #14028 |
|
36450p- |
20 gallon
Legion, Pressure Wall Kettle model LT20, stainless steel,
hemispherical bottom, hinged lid, 1.5" outlet, 35 PSI working
pressure at 300º F, 23" diameter x 38" overall height, stainless
steel legs with pad feet. |
|
57925p- |
20 gallon
Inox, Jacketed Kettle, with impeller & emulsifier, closed top,
jacket rated 100 PSI at 350º F, vessel atmospheric, with Ultra Turax
UTC 80/KT, 5 HP 230/460/60/3 phase homogenizer, Ajjitec AJJZ01, 1/4
HP 230/460/60/3 phase impeller, National Board #460 |
|
56039p- |
20 gallon
Hamilton, Steam Jacketed Kettle model SA, 23" diameter x 16" deep
hemispherical bottom vessel, 2" center bottom outlet, manual valve &
tri clamp connections, stainless steel steam jacket manufacturer
tagged & National Board coded for 60 PSI, 2 piece top covers,
stainless steel legs & stainless steel mixer mount, with Lightnin
NAR33 pneumatic powered mixer, with 3.5" diameter x 20" long
stainless steel shaft propeller type agitator |
|
34708p- |
20 gallon
Hamilton, Kettle stainless steel, full jacket operates 70 PSI,
Lightnin air operated agitator in cover, 3.5" three blade prop, 1"
center bottom drain with ball valve 10" from floor, cover has 3" &
1" tri clamp fitting, kettle is mounted on stainless steel 3' x 4'
cart with casters, kettle is 25" inner diameter x 16" deep, 3
stainless steel legs, temperature probe overall 64" high x 3' x 4'. |
|
44475p- |
20 gallon
Groen, Steam Jacketed Kettle model EE20, electronically heated, 304
stainless steel construction with polished food grade finish, rated
for 30 PSI at 300º F, 208 volt, 3 phase, jacketed fluid sight glass,
analog temperature dial, factory controls, 1 piece hinged cover,
1.5" center bottom discharge with tangential discharge valve & 12"
floor clearance, drain outlet includes 9" perforated strainer plate
with 1/4" holes, formerly used in pharmaceutical facility. |
|
56842p- |
20 gallon
Groen, Open Top Kettle model N20SP, jacketed, all stainless steel
construction with food grade polish, 20" diameter x 18" deep,
standard jacket rated for 45 PSI at 300º F, 1" center bottom
discharge with Acme threaded bevel seat connection, flush seating
valve & 20" floor clearance, mount for portable clamp on mixer,
loose fitting 2 piece hinged cover with mixer slot, mounted on 4
legs with flanged feet interconnected on 3 sides, formerly used in
cosmetic service |
|
19890p- |
20 gallon
Groen, Kettle model PT20, 25 PSI jacket at 300° F, pedestal base,
all stainless steel, jacket is half way up the sides & full bottom,
1.5" bottom side drain with tri clamp fittings & valve, 20" diameter
x 19" deep, hinged cover with tri clamp fitting, overall 38" high x
26" square. |
|
31295p- |
20 gallon
Groen, Kettle model D10, stainless steel exterior, open top, 40 PSI
rated jacket, 20" diameter x 19" deep x 38" high, tilt design |
|
46398p- |
20 gallon
capacity Groen, Kettle model N20, 80 PSI jacket, National Board
#129116, 1.5" center bottom outlet, stainless steel legs |
|
38472p- |
20 gallon
capacity Groen, Kettle model H20, 45 PSI, self-contained gas fired,
side bottom discharge with lid |
|
56561p- |
20 gallon
capacity Groen, Kettle model EE20, stainless steel construction, 20"
diameter x 20" deep, self-contained, electrically heated, rated for
240 volt 29 amps 3/60 hertz, jacketed for 30 PSI at 300º F |
|
54031p- |
20 gallon
Allfab-Bardeau, Steam Jacketed Kettle model LB20, 25 PSI working
pressure, with 21" diameter x 18" deep hemispherical bottom
stainless steel vessel with 1.5" front bottom outlet with valve,
stainless steel steam jacket manufacturer tagged & ASME stamped for
25 PSI working pressure, complete with removable stainless steel top
cover, rests on 3 legs with adjustable threaded feet, presently set
at 34" infeed height, & 13" discharge height from the valve, has
been hydrostatically pressure tested |
|
42599p- |
15 gallon
Open Top Kettle, stainless steel, 18" diameter x 16" deep, no
manufacture plate, unit has 1.5" center bottom discharge with 42"
floor clearance, 2 piece hinged cover with insulated body, mounted
on 3 steel legs |
|
55063p- |
15 gallon
Letco Inc., Jacketed Kettle, stainless steel, dimpled jacket rated
for 90 PSI at 330º F, National Board #346, 18" diameter x 12"
straight side x 6" deep cone, equipped with 2" butterfly valve on
center discharge, 1/4 hinged lid, currently standing 56" high with
stainless steel stand with adjustable legs |
|
43574p- |
15 gallon
Lee, Tilting Kettle, equipped with a pouring lip, stainless steel
construction, stainless steel stand, 90 PSI half jacket, maximum
operating temperature of 300º, no agitator |
|
51080p- |
15 gallon
Greerco, Triple Motion "Agi Mixer" model 403900954, all 316
stainless steel wetted parts, fully jacketed body, National Board
rated 935 for 40 PSIG at 287º F, shell rated for full VAC/15 PSI at
287º F, vessel manufactured by JC Pardo & Sons, dome cover with
triple motion agitator on hinged mount with pneumatic tilt, spring
loaded Teflon scrapers, counter rotating blade & homogenizing mixer,
3 top inlets, (2 with sight glass 3" & 4" ) 4" is on hinged cover,
agitator driven by Reeves vari speed drive 1/2 HP, 18.9 to 189 RPM,
homogenizer driven by 3 HP drive at 3505 RPM, all factory controls
gas purged for hazardous duty, drives explosion proof for Class II,
Groups F & G, vessel has 1.5" center bottom discharge with flush
seating ball valve & flush seating temperature sensor, mounted in
painted steel frame |
|
34657p- |
10 quart
Groen, Steam Kettle model TDB610, self-contained electrically heated
open top tilting with pouring lip, 50 PSI rating, 240/1/60, 4
kilowatt. |
|
56560p- |
10 gallon
total capacity Vulcan, Kettle model DC6, (2) 5 gallon kettles, 12"
diameter x 15" deep, mounted on cabinet, self-contained, stainless
steel construction, jacketed, rated for 50 PSI at 298º F, with
manual tilt & pouring lips, cabinet includes steam generator to heat
jackets of kettles, electrically heated, 480 volt 24 kW 15 PSI 180
pound/hour valve capacity, National Board #18220 |
|
49483p- |
10 gallon
Legion, Steam Jacketed Kettle model TWP10, stainless steel, 16"
diameter x 14" deep hemispherical bottom stainless steel vessel with
pouring lip & hand crank actuated tilt to dump discharge mechanism,
stainless steel steam jacket manufacturer tagged & U stamped for 35
PSI steam pressure, pedestal base, all stainless steel product
contact surfaces |
|
57939- |
10 gallon
Lee, Kettle, stainless steel, tilting, jacketed, steam, with pouring
lip mounted on painted mild steel A frame, 40 PSI jacket |
|
47102p- |
10 gallon
Kettle, jacketed, all stainless steel |
|
57443p- |
10 gallon
Hamilton, Jacketed Kettle, jacket rated 60 PSI at 293º F, kettle has
bracket for mixer, portable on wheels |
|
27313p- |
10 gallon
Groen, self-contained Kettle model TDH40, steam, gas heated, table
top model, ⅔ jacket, 50 PSI at 300° F, manual tilt with pouring
spout, thermostatic temperature control, natural gas, input 52,000
BTU's per hour, manifold gas pressure 3.5 in WC, 1/60/115 volts, amp
1, kettle is 15" deep x 16½" diameter, bolted on table 30½" x 27½",
overall height 54" including table. |
|
30613p- |
10 gallon
Groen, self-contained Kettle model TDB40, electric steam, ⅔ jacket,
50 PSI at 300° F, 3 phase power, manual tilt discharge, thermostatic
temperature control, Kettle is 16.5" diameter x 15" deep, all
stainless steel, controls are mounted on a stainless steel base, 28"
long x 21" wide x 26" high overall. |
|
48835p- |
10 gallon
Groen, Kettle, stainless steel exterior, open top, self-contained
electrically heated, 50 PSI rated jacket, 16" diameter x 12" deep x
4' high on 27" x 28" stainless steel base with electrical control
enclosure. |
|
57249- |
10 gallon
Groen, Kettle model TDB7-40, U shaped, open top, dish bottom,
atmospheric jacket, stainless steel exterior, 24" height x 17" width
x 27" length overall dimensions |
|
44217p- |
10 gallon
Groen, Kettle model DT10, stainless steel, unit is manual tilt,
jacketed rated for 35 PSI at 300º F has bottom discharge on the
stand |
|
13706- |
7 gallon
Kettle, stainless steel, 1¼" drain, low pressure jacket on bottom &
half way up sides, 18" diameter x 19" deep, 3 carbon steel 2" legs,
no cover, chemical grade, 40" high x 20" square. |
|
51118p- |
6 gallon
Vulcan, self-contained Cooking Kettle model DC6, gas fired, tilt to
dump, all stainless steel, 50 PSI, 11.5" diameter x 14" deep, ASME
stamped & National Board coded, stainless steel vessel, 36" wide x
33" long (front to back) x 22" high stainless steel shrouded base
with 58" high stack & make up water spout, 170,000 BTU rated gas
fired boiler unit, previous owner said never used, still on original
skid |
|
53284p- |
6 gallon
Cleveland, self-contained Kettle on table, tilting. |
|
36868p- |
5 quart
Lee, Kettle, 45 PSI jacket, side sweep agitator, 1.5 HP vari speed
drive. |
|
54887p- |
5 gallon
Melting Kettle, electrically heated, jacketed, for lipstick or semi
automatic hot pour application, 9" diameter x 13" deep melting tank
with cone bottom encased in all stainless steel shroud with jacket,
heating media make up reservoir with sight glass, jacket fluid
re-circulating pump, 2" bayonet heater port, temperature port, small
agitator mounting platform above vessel, heated bottom valve with
manual control, mounted on cabinet style base with threaded column
for discharge height adjustment, includes original control panel,
formerly used for cosmetic hot pour application |
|
35764p- |
5 gallon
Lee, Tilting Kettle, stainless steel, 16" diameter x 10" depth, with
⅔ stainless steel jacket, rated for 40 PSI at 290º F, hydro tested
to 80 PSI with National Board stamp, opposing Trunion mount/steam
inlets & piping, no stand, requires table. |
|
57055p- |
5 gallon
Lee, Open Top Kettle model 5GALD, features all stainless steel
construction with polished food grade finish, fully jacketed,
shrouded & insulated body rated for 90 PSI at -20º to 332º F,
internal temperature well, 1.5" center bottom discharge with Lee
"fluids flow" flush seating ball valve & 24" floor clearance, 1
piece loosed fitting cover slotted for mixer, portable clamp type
mixer mount, mounted on 3 fixed legs with flanged floor feet
interconnected on 2 sides, 16.5" diameter x 10" deep, formerly used
in cosmetic service |
|
54289p- |
5 gallon
Kettle model TDB/720, open top, vertical orientation, U shaped,
stainless steel exterior, center scrape agitation, 240 volt single
phase |
|
22157p- |
5 gallon
Groen, Kettle model TDB720, table model, 50 PSI, self-contained,
3/60/240 kilowatt 6.3 tilt discharge with pouring spout, jacket ⅔ up
on side of kettle, 14" inner diameter, 11" deep, unit is mounted on
stainless steel base with adjustable temperature controls, unit
requires an electrical connection, National Board #118073, overall
23' high x 26" long x 20" deep, all stainless steel. |
|
19893p- |
5 gallon
Groen, Kettle model TDB720, table & screener, all stainless steel,
50 PSI at 300º F, self-contained electric, 3/60/240 Kilowatt 6.3
tilt discharge with pouring spout, jacket is ⅔ up on side, kettle is
14" inner diameter, 11" deep, mounted on stainless steel table with
a 22" wide, 26" long screening shelf with ¼" holes, product can be
separated from cooking media, pulls out from under table, kettle can
operated on 1/220 volts or 3 phase, overall 43" high x 28" wide x
27" L |
|
55111- |
1.5 gallon
Jacketed Kettle, stainless steel |
|
|
|
.jpg){kind=link}
