SCHIER COMPANY, INC.

  We buy and sell used dairy processing equipment.

     Email us today for a quotation for your new project!

14459 S. 65TH W. AVE.  Kiefer, OK.   PH: 918-321-3151   FX: 918-321-5777

Email: sales@schiercompany.com

Gaulin Homogenizer, HTST,High Pressure Pumps, silo,,Mueller Stainless Steel Tanks,Used Dairy Processing Equipment,Pasteurizers, Westfalia separators, De Laval clarifiers, evaporators, reverse osmosis systems, dryers,,Cheese Making Equipment, Damrow finishing vats, Kusel cheese vats, curd mill, vacuum sealers, heat exchangers, positive pumps, centrifugal, mozzarella, cheese cutters, Federal Fillers, Cherry Burrell gable top carton fillers, aseptic, piston, bag pouch fillers, cleaning equipment, ice cream equipment, ice cream freezers, ingredient feeders, soft serve batch freezers, novelty ice pop, ice cream bar makers,shrink and heat tunnels, freeze tunnels, pressure wall jacket processors, atmospheric jacket processors, cottage cheese vats, presses, filters, augers, mills, fitzmill, farm tanks, vacuum sealers, multicompartment tanks, single shell stainless steel, Pharmaceutical, Groen kettles, ribbon blenders, lightnin mixers, truck, butter, chopping cutting, bottle making,  Plate Heat Exchanger

HTST PasteurizersHome PageUHT Pasteurizer SystemTubular Heat ExchangerScraped Surface Heat ExchangersHTST Pieces

Inventory

Item # DESCRIPTION
37725p- AGC, Plate Heat Exchanger model AR56F, painted frame tie bar take up, 4" clamp connections with 54 total plates & 1 connector with 2.5" clamp connections

 

51633p- AGC, Plates for Heat Exchanger model PRO5, each plate is about 5.6 square feet.

 

68483-New AGC, Pro Plus 0.7mm 316 stainless steel plated with nitrile snap in gaskets

 

64214p- Alfa Laval, 40.26 square foot Stainless Steel Plate Heat Exchanger model M1017, maximum working pressure 150 PSI at 150 F, heat exchanger has (4) 2.5" flange inlets & outlets, pack length for plates 2.91"

 

3760- Alfa Laval, Connector Terminal model P13.

 

25347p- Alfa Laval, Connector Terminal model P15, 3" I line connections

 

48966- Alfa Laval, Connector Terminals model P5, 1.5" tri clamp port

 

65788- Alfa Laval, Heat Exchanger model CLIP 8RM, single section bolt frame, stainless steel, with 54 plates installed

 

60634- Alfa Laval, Moveable Head (Pressure Plate) stainless steel for H10RC tie bar take up plate heat exchanger

 

66496- Alfa Laval, Plate & Frame Heat Exchanger, Clip 8, last used to pre-chill water with glycol

 

55409p- Alfa Laval, Plate Cooler Type M10-BASE, manufacturing number 30103-17122, stainless, maximum working pressure 110C., 8 bar

 

43282- Alfa Laval, Plate Heat Exchanger Assembly model P14RB stainless steel, 2.5" port 96" rail length

 

57661p- Alfa Laval, Plate Heat Exchanger model A15BFG, high thermal performance, parallel flow unit, standard ASME U stamp, carbon steel frame, bolted construction, no welded parts, clip on technology for a glue free gasket design, 145 plates constructed in stainless steel for 1200 square foot surface, 41.28 US gallon capacity, 2000 GPM maximum flow rate, 6' 10" high x 2' 4" wide dimensions, 18-1/4" closed size, 300 PSI design pressure, 150 PSI working pressure, 6" diameter connection size

 

45362p- Alfa Laval, Plate Heat Exchanger model H10P45RC, stainless steel construction, 3" tri clamp ports, 55" rail length

 

57681- Alfa Laval, Plate Heat Exchanger model H10RC, stainless steel construction, approximately 804 square foot surface area with (119) 19.75" wide x 57" high plates, rated 145 PSI at 285 F, stainless steel side rails & covered ends

 

50591p- Alfa Laval, Plate Heat Exchanger model H10RC, stainless steel tie bar style, 3" clamp connections, 120" rail length

 

51626- Alfa Laval, Plate Heat Exchanger model H7, 96" rail length, 3" clamp ports, 2 terminals with 2.5" ports, includes 43 plates in 3 sections, total area is 163 square feet

 

34802p- Alfa Laval, Plate Heat Exchanger model M10BFG, mild steel, 4" tri clamp & 4" flange ports, 36" rail length, 39" overall height, with 6 plates

 

68639p- Alfa Laval, Plate Heat Exchanger model M6-FG, 163.1 square foot, stainless steel plates, rated 150 PSI at 150 F, 3" inlet/outlets

 

67103p- Alfa Laval, Plate Heat Exchanger model M6MFG, 27 square foot, stainless steel plates, rated 150 PSI at 320 F with 41 plates, 2" inlet/outlet

 

67309p- Alfa Laval, Plate heat exchanger model P13-R1 single section

 

38298p- Alfa Laval, Plate Heat Exchanger model P2HRBL, stainless steel sanitary, 30 total 10" x 28" plates with 2 end plates 10 bolt bundle compression 3" product in & out with tri clamp connection, 2" in & out for heat transfer

 

25463- Alfa Laval, Plate Heat Exchanger model P45, re-gasketed.

 

66373p- Alfa Laval, Plate Heat Exchanger with spare plates, stainless steel

 

63095p- Alfa Laval, Plate Heat Exchanger, non-food grade, 216 square foot, 95 graphite plates, 17" wide x 47" high x 3/8" thick, 132 liter volume, maximum design of 8 bar & 180 C, plates manufactured by SGL Technik, type S10N, material 940-DIA-NSI-G16-5-200, on frame with (2) 4" top flanged nozzles & (2) 3" bottom flanged nozzles

 

63097p- Alfa Laval, Plate Heat Exchanger, non-food grade, 32 square foot, 16 graphite plates, 17" wide x 47" high x 3/8" thick, 21 liter volume, maximum design of 8 bar & 180 C, plates manufactured by SGL Technik, type S10N, material 940-DIA-NSI-G16-5-200, on frame with (2) 4" top flanged nozzles & (2) 3" bottom flanged nozzles

 

63096p- Alfa Laval, Plate Heat Exchanger, non-food grade, 62 square foot, 29 graphite plates, 17" wide x 47" high x 3/8" thick, 39 liter volume, maximum design of 8 bar & 180 C, plates manufactured by SGL Technik, type S10N, material 940-DIA-NSI-G16-5-200, on frame with (2) 4" top flanged nozzles & (2) 3" bottom flanged nozzles

 

36370- Alfa Laval, Plates for Heat Exchanger model P13, re-gasketed

 

68477p- Alfa Laval, Press Assembly type P45-RCSS, 3" tri clamp ports, 55" rail length

 

43269- Alfa Laval, Tie Bar Style Plate Heat Exchanger model H10FMC, stainless steel, 3" #15 connections, maximum temperature 285 F, maximum pressure 10 bar, 73" rail length, 90" overall height

 

44793- Alfa Laval, Tie Bar Style Plate Heat Exchanger model H10RC, stainless steel construction, 3" clamp connection, maximum temperature of 285 F, maximum working pressure is 10 bar, 121" rail length, 90" overall height

 

43271p- Alfa Laval, Tie Bar Style Plate Heat Exchanger model H10RC, stainless steel, 3" clamp connections, maximum temperature 285 F, pressure 7 bar, 145" rail length, 77" overall height

 

66251- Alfa, Plate Heat Exchanger model CLIP6-RM, 3 section, 102.17" long, 2" T/C connections, 16,500 PPH 20% whey or 14,300 PPH 205 whey

 

48242p- American Heat Reclaiming, Plate Heat Exchanger with 8 stainless steel plates, plates are 16" wide x 42" high, rated for 225 PSI test, 150 PSI working at 200 F both sides

 

48241p- American Heat Reclaiming, Plate Heat Exchanger, with (63) 14" wide x 48" high stainless steel plates giving 224.3 square feet of heat transfer area, design pressure of 125 PSI at 150 F, National Board #9496

 

51777p- APV, Back End Support model R50

 

8466- APV, Carrying Bars model R51, size 5 for plate heat exchanger frame.

 

8465- APV, Carrying Bars model R51, size 8 for plate heat exchanger frame.

 

8463- APV, Connector Grid model R5, stainless steel, 2" bevel seat connections.

 

3747- APV, Connector Terminal model HMB, for plate heat exchanger frame.

 

8216- APV, Corner Bosses model HX, assorted for use on connector terminals.

 

67669- APV, Dual Spindle Take Up Plate Heat Exchanger R51-PC, stainless steel, with 2 connector grids, size 6 frame, 4" clamp frame connections, 2.5" clamp grid connections, 73H/74R/49C

 

51775p- APV, Follower model R50

 

68475- APV, Heat Exchange Plates model R51

 

7910- APV, Heat Exchanger End Plate model R5, factory re-gasketed type 304, KL32.

 

7913- APV, Heat Exchanger End Plate model R5, type 304, KL33, dye tested with used gasket.

 

55656- APV, Heat Exchanger Frame model R51, all stainless steel construction, size 8 frame, 102" rail length, 4" clamp ports

 

51623- APV, Heat Exchanger Frame model R51, all stainless steel construction, size 8 frame, 132" rail length, 3" clamp ports

 

51622- APV, Heat Exchanger Frame model R51, all stainless steel construction, size 8 frame, 180" rail length, 4" clamp ports

 

55260p- APV, Heat Exchanger Frame model R51, stainless steel, 3" clamp ports, size 6 frame

 

34809- APV, Heat Exchanger Frame model R51, stainless steel, 3" clamp ports, size 8 frame

 

55985p- APV, Heat Exchanger Frame model R51, stainless steel, 3" I line ports, size 10 frame

 

37994p- APV, Heat Exchanger Frame model R51, stainless steel, 3" threaded ports size, 1 frame

 

48968p- APV, Heat Exchanger Frame model R51, stainless steel, 4" clamp ports, size 5 frame

 

48969p- APV, Heat Exchanger Frame model R56S, stainless steel, 3" & 4" clamp ports, size 4 frame

 

36175- APV, Heat Exchanger Frame model TR51, stainless steel, can be engineered to specific duties, dual spindle take up size 5 frame, 4" clamp connections

 

25348p- APV, Heat Exchanger Intermediate Terminals model R5.

 

59374- APV, Heat Exchanger model R51, set of (2) 137" rails, size 7 frame

 

68482- APV, Heat Exchanger Plates model HMB, re-gasketed

 

68480- APV, Heat Exchanger Plates model HX, re-gasketed

 

68481- APV, Heat Exchanger Plates model R5

 

7909- APV, Heat Exchanger Plates model R5, factory re-gasketed type 304, (2) L33, (22) L11, (32) Rll, (3) L12, (3) L13, (2) L21, (3) L31, (1) L41, (1) L12D, (5) L21D, (3) R12, (4) R13, (5) R21, (4) R31, (1) R43, (3) R21D.

 

12312p- APV, Heat Exchanger Plates model R5.

 

32718- APV, Heat Exchanger Plates model SR35

 

65807- APV, Heated Exchanger model R51, plate divider

 

37977- APV, Paraflow Plate Heat Exchanger Assembly model HMBM, double spindle take-up 62" rail length, 2" threaded port

 

66835p- APV, Pasteurizer Processing System, type "Junior", food grade sanitary, all 316L stainless steel sanitary contact parts, 4" x 24" plate heat exchanger with approximately 50 plates & rated for 200 PSI service, approximately 20' x 1" holding tube, carbon steel heat exchanger requires house steam for closed loop heating media recirculation via centrifugal pump, factory control panel, mounted in stainless steel frame with casters, formerly used in beverage & juice processing

 

59526p- APV, Plate & Frame Heat Exchanger model CR5 Hydraulic, all stainless steel, 2 regeneration blocks, (161) 16" x 61" plates SA240/S31600

 

55982- APV, Plate & Frame Heat Exchanger model CR5, hydraulic, stainless steel, 3" #15 ports, double hydraulic tank up spindle, 108" frame length

 

29636- APV, Plate Cooler model SR210, snap in gaskets, 2.5" inlet & outlet, 1 section, 80 plates (71 in unit & 9 spares), previously used in food plant.

 

68593p- APV, Plate Heat Exchange Frame model R52, stainless steel, twin screw take up, 3" connections, size 2 frame

 

37976p- APV, Plate Heat Exchanger & Frame model CR5, hydraulic, stainless steel, 3" #15 & clamp ports, double hydraulic take-up spindle, 96" rail length, approximate dimensions: 101" high x 112" overall length x 37" wide

 

32743- APV, Plate Heat Exchanger & Frame model CR5, hydraulic, stainless steel, 4" ports, double hydraulic take up spindle, approximate dimensions: 101" high x 147" overall length x 37" wide, 120" rail length, less connector terminals & plates. Parts only

 

48223p- APV, Plate Heat Exchanger & Frame model R56, 115 square feet, 53 stainless steel 60" x 16" plates, 4" flanged connections, 70" long x 21" wide x 72" high overall dimensions

 

48225p- APV, Plate Heat Exchanger & Frame SR2MS12, 93 square feet, 70 stainless steel 12" x 32" plates, rated for 150 PSI at 300 F, 2" flanged connections, National Board #146

 

43278- APV, Plate Heat Exchanger Follower Block model CR5

 

36374p- APV, Plate Heat Exchanger Frame model ER51, 3" clamp ports, double spindle take-up, size 3 frame

 

51052- APV, Plate Heat Exchanger Frame model R51, stainless steel, can be engineered to specific duties, dual spindle take up, size 3 frame, 3" clamp connections

 

67670- APV, Plate Heat Exchanger Frame Only model HMB, stainless steel, dual spindle take up, size 7 frame, 2.5" clamp connections

 

67671- APV, Plate Heat Exchanger Frame Only model HX, stainless steel, size 4 frame, 2" I line connections

 

38929p- APV, Plate Heat Exchanger model 23J679 01, 98 plates, 316 stainless steel, 180 square foot, 30" x 12" plates, carbon steel frame designed for 150 PSI at 300 F, -20 F at 150 PSI, (2) 2.25" inlets tri clamp, (2) 2.5" outlets flange mounted, room for more plates, water in & out is on the same side, EPDM gaskets, cooled water at 53 gallons per minute from 149 - 44 F, overall dimensions 40" long x 16" wide x 40" tall

 

65283p- APV, Plate Heat Exchanger model A15BFG, approximately 1,688 square foot surface area, stainless steel plates, rated 150 PSI at 212 F, National Board #5580

 

52246p- APV, Plate Heat Exchanger model CR5 HYDRAULIC

 

47576p- APV, Plate Heat Exchanger model HXL6, mild steel, 2" clamp ports, 37" rail length, 48 plates

 

40657p- APV, Plate Heat Exchanger model HXV8, stainless steel contact parts, contains 19 plates.

 

8520- APV, Plate Heat Exchanger model JHE, tie bar take up, painted frame, 1" DIN connections, 18/18 plates & 30/12 plates.

 

42253- APV, Plate Heat Exchanger model Junior, 59 at 3" x 23", 3 transfer plates

 

8468- APV, Plate Heat Exchanger model R50, fixed head only, 4" clamp ports.

 

12967p- APV, Plate Heat Exchanger model R51, 1 section, 77 plates, 431.2 square foot

 

68211- APV, Plate Heat Exchanger model R51, 70 plates, 2 section, plates have been cleaned, no gaskets

 

47844- APV, Plate Heat Exchanger model R51, size 3 frame, 316 plates, configured as a 18000LB/HR HTST for 54 brix juice concentrate blends & smoothie with a temperature progression of 70-178-190-82-60 degrees F using 55000 LBS/HR of 193 F hot water & 25000 LBS/HR of 34 chilled water, frame 4" clamp connections, connectors 2.5" clamp connections, reconditioned available for immediate delivery.

 

32052p- APV, Plate Heat Exchanger model R51, size 9 frame, 100,000 pounds per hour capacity HTST with temperature progression of 40-175-35 using 600 gallons per minute 180 F of hot water & 300 gallons per minute of 28 F glycol.

 

66248- APV, Plate Heat Exchanger model R51T

 

62665- APV, Plate Heat Exchanger model R56, stainless steel, 2 section with 13/22 plates, tie bolt frame, 4" clamp ports, 36" rail length, 46" overall length

 

62664- APV, Plate Heat Exchanger model R56, stainless steel, single section with 57 plates, tie bolt frame, 4" clamp ports, 52" rail length, 60" overall length

 

62667- APV, Plate Heat Exchanger model R56SH/200, stainless steel, 2 section with 59/120 plates, 4" clamp ports, 82" rail length, 96" overall length

 

65294p- APV, Plate Heat Exchanger model R5MGS16, 284 square foot, (104) 16.5" wide x 61" high 316 stainless steel plates, rated 200 PSI at 275 F, 4" inlet/outlets, National Board #2680

 

31607p- APV, Plate Heat Exchanger model SR35F model WO33824, 78 plates

 

42765p- APV, Plate Heat Exchanger model SR35T, with stainless steel contacts, heat exchanger has 52 plates measuring 15" x 44" which gives a heat transfer area of 312 square feet

 

40067p- APV, Plate Heat Exchanger model TR159, 11 plates at 6.5" x 22.5", 12 square foot surface area

 

25384- APV, Plate Heat Exchanger Press Assembly model HMB, stainless steel, 2.5" ports, 85" rail length.

 

3689- APV, Plate Heat Exchanger Press Assembly model HMB, stainless steel, 2.5" tri clamp ports, 66" rail

length.

7333- APV, Plate Heat Exchanger Press Assembly model HMBM, 56" rail length, 2.5" threaded ports.

 

36400p- APV, Plate Heat Exchanger Press Assembly model SR11, stainless steel, 1.5" clamp ports, 34" overall height x 32.5" rail length

 

42539p- APV, Plate Heat Exchanger Press Assembly model SR11, stainless steel, 1.5" clamp ports, 34" overall height x 32.5" rail length

 

36402p- APV, Plate Heat Exchanger Press Assembly model SR15S, stainless steel with 53 plates, 1.5" clamp ports, 35" overall height x 12" wide x 25" rail length.

 

13687p- APV, Plate Heat Exchanger, 77 square foot, 40 stainless steel plates, carbon steel frame, plates are 32" long x 12" wide, National Board #3513, 150 PSI at 300 F, ASNI flange 2.5" inlet & outlet all on same side of Heat Exchanger

 

54118p- APV, Plate Heat Exchanger, all stainless steel, 5.5" x 18" plates, 1 regeneration block, 42 plates total, with 1" holding tubes 18" long each 7 tubes total. There is no model number or serial number on the heat exchanger. May be an APV as it was used in conjunction with an APV homogenizer, capacity unknown.

 

68478-New APV, R5 Heat Exchange Plates with snap in gaskets

 

51776p- APV, Take Up Screw model R50

 

8469- APV, Tightening Spindle Assembly for Plate Heat Exchanger model R51, consisting of #311800 tightening screw bushing & #335490 bushing nut.

 

48244p- Bell & Gossett, ITT GPX Plate Heat Exchanger model GPX151, 8 plates measuring 10" x 30" for approximately 16 square feet surface area with 2" inlet/outlet, stainless steel product contact parts, last used in pharmaceutical application, rated for 150 PSI at 230 F both sides, National Board #69989

 

67674- Cherry Burrell Heat Exchanger Frame model SLS-150, less plates, 3" bevel seat connections, 2 connector terminals, 1 with 3" bevel seat connections other 2" bevel seat connections

 

67673- Cherry Burrell Heat Exchanger Frame model SLS-150, less plates, 3" I line connections, 2 connector terminals with 2" I line connections

 

67672- Cherry Burrell Heat Exchanger Frame model SXLAHS-200, 3" I line connections, including 64 total plates & 1 connector

 

54333p- Cherry Burrell Thermaflex, Plate Heat Exchanger model 435SBL1, frame & body constructed in 304 stainless steel, 200 PSI design pressure, 150 PSI working pressure, 29 plates in 1 section & 43 plates in 2 section, 72 total Nitrile gasket plates for 154.80 square foot surface, 10.5 US gallon capacity, 50 GPM maximum flow rate, 14-3/8" closed size, 3" diameter connection

 

3753- Cherry Burrell, Connector Terminals model "S", 2" & 3" threaded & I-line ports.

 

43266- Cherry Burrell, Heat Exchange Plates model 435 Titanium

 

65809- Cherry Burrell, Heat Exchanger Plates model 65SSTH

 

8218- Cherry Burrell, Heat Exchanger Plates model S, re-gasket.

 

43448- Cherry Burrell, Plate Heat Exchanger & Frame Thermaflex type model 217SB1 has 2-1/4" to 1.5" outlet

 

35485p- Cherry Burrell, Plate Heat Exchanger Frame model SAS125, stainless steel, 2" threaded ports, with 44 plates, 1 intermediate terminal, 77" rail length, 71" overall height

 

7649- Cherry Burrell, Plate Heat Exchanger Frame model SAS50, 50" rail length, 2" threaded ports.

 

7334- Cherry Burrell, Plate Heat Exchanger Frame model SLAS100, stainless steel.

 

12307p- Cherry Burrell, Plate Heat Exchanger Frame Only model SAS75, stainless steel, 2" ports.

 

55491- Cherry Burrell, Plate Heat Exchanger model 217SBH, 37 plates at 10" x 36", 92300YX, TPL92300

 

57678p- Cherry Burrell, Plate Heat Exchanger model 217SBH, 85.5 square foot, 316 stainless steel, 7.2 gallon, 45 approximate 10" x 36" long plates, 3" tri clamp inlet/outlets, expandable stainless steel frame

 

56321- Cherry Burrell, Plate Heat Exchanger model N35TKSB1, stainless steel, combination dual spindle & tie bar take up, 3" clamp connections, 59 total plates in one section

 

3696- Cherry Burrell, Plate Heat Exchanger model SLAHS, stainless steel, 2" I-line ports, 74" rails.

 

42879- Cherry Burrell, Plate Heat Exchanger model SLAHS100, stainless steel with 54 plates & 2 connectors, 2" I-line connections

 

3700- Cherry Burrell, Plate Heat Exchanger model SXLAS150, stainless steel, 3" I-line ports with 30 plates.

 

43267p- Cherry Burrell, Plate Heat Exchanger model SXLAS50, 3" I-line port

 

35757p- Cherry Burrell, Plate Heat Exchanger Thermaflex model 217SB1, features (27) 10.5" x 36" plates, all stainless steel food grade construction, 2" inlet & outlet with tri clamp connections, configured with 4 removable inlets/outlets on each side on exchange

 

46061- Cherry Burrell, Plate Heat Exchanger Thermaflex model 655STH, stainless steel, dual spindle hydraulic take up, 4" I-line fixed head & follower connections, 5 each intermediate terminals with 3" I-line connections, 270 total plates

 

64446p- Cherry Burrell, Plate Heat Exchanger, all stainless steel construction, (14) 6" wide x 30" long plates, 1" sanitary threaded inlets & outlets

 

68476- Cherry Burrell, Plated Heat Exchanger model 435, 3" I line ports, double spindle take up, 55

 

68485- Cherry Burrell, Press Assembly model SLAS75, stainless steel

 

57186p- Cherry Burrell, Super Plate Heat Exchanger model SLAS75, chilled water refrigerant, hot water heating, 300 GPH, 1.5" tri clamp inlet & outlet, 1.5" tri clamp CIP inlet, 2000 pound weight, 72L x 24W x 78H dimensions, last used for making ice cream

 

51630- Chester Jensen York, Heat Exchanger Plates model HM

 

64941- Chester Jensen York, Plate Heat Exchanger model HM45, with additional plates added to bring the total up to 72, 2.5" ports

 

44788p- Chester Jensen York, Plate Heat Exchanger model HM63, stainless steel, 2.5" #15 threaded ports single take-up 68" rail length

 

50594p- Chester Jensen York, Plate Heat Exchanger model HMC63, 2.5" #15 ports, single take up, 49.5" rail length

 

44792p- Chester Jensen York, Plate Heat Exchanger Press Assembly model HM45 stainless steel construction 2.5" #15 threaded ports single take-up 50.5" rail length

 

44790p- Chester Jensen York, Plate Heat Exchanger Press Assembly model HM55 stainless steel construction 2.5" #15 threaded ports single take-up 60" rail length

 

45361- Chester Jensen, Connector Terminals model HM

 

3749- Chester Jensen, Connector Terminals model HT.

 

51665- Chester Jensen, Falling Film Cabinet type Chiller model XRW120113, stainless steel, full flooded ammonia, includes 11 plates each 44" high x 60" long, National Board stamps for all plates, stainless enclosure, 60" wide x 66" long x 77" high, 4" outlet

 

51047- Chester Jensen, Heat Exchanger Plates model HG type 304, dye tested with used gaskets

 

7361- Chester Jensen, Heat Exchanger Plates model HT, stainless steel.

 

21867- Chester Jensen, Heat Exchanger Plates.

 

56926- Chester Jensen, Heat Exchanger System model HMC, complete system, 3 section, 1000 to 1500 GPH, 117 plates, 436.41 square foot

 

45363p- Chester Jensen, Hydraulic Press Assembly model HG stainless steel construction size 90, 3" clamp ports three intermediate terminals 98" rail length

 

62078p- Chester Jensen, Plate Chiller

 

55037p- Chester Jensen, Plate Cooler model XB200T232, direct expansion capability, 2 cooling plates 45" x 60" each, all stainless steel

 

55013p- Chester Jensen, Plate Cooler model XB2OT232, direct expansion capability with accumulator, 2 cooling plates 45" x 60" each, all stainless steel

 

48980- Chester Jensen, Plate Heat Exchanger model 45HTC, frame only, 2" #15 port

 

36176- Chester Jensen, Plate Heat Exchanger model HM, of various capacities, stainless steel, can be engineered to meet specific duties, 2.5" bevel seat connections, single take up, size 45

 

18461- Chester Jensen, Plate Heat Exchanger model HM, stainless steel, that can be engineered to meet specific duties, 2.5" bevel seat connections, single take up, size 63.

 

10412- Chester Jensen, Plate Heat Exchanger model HM, stainless steel, that can be engineered to meet specific duties, 2.5" bevel seat connections, single take up, size 76.

 

10413- Chester Jensen, Plate Heat Exchanger model HM, stainless steel, that can be engineered to meet specific duties, 2.5" bevel seat connections, single take up, size 80.

 

10411- Chester Jensen, Plate Heat Exchanger model HM, stainless steel, that can be engineered to meet specific duties, 2.5" bevel seat connections, single take up, size 90.

 

31098p- Chester Jensen, Plate Heat Exchanger model HMC, size 110, 2.5" clamp port, #15 threaded port, 11' x 75" overall length.

 

10406- Chester Jensen, Plate Heat Exchanger model HMC, size 115, stainless steel, that can be engineered to meet specific duties, 2.5" bevel seat ports, dual take up high pressure frame.

 

8479- Chester Jensen, Plate Heat Exchanger model HMC, size 125, stainless steel, that can be engineered to meet specific duties, 2.5" bevel seat ports, dual take up high pressure frame.

 

32737- Chester Jensen, Plate Heat Exchanger model HMC, size 63, 2.5" clamp ports, double take up 105" overall length.

 

14547p- Chester Jensen, Plate Heat Exchanger model HMC, size 76, 124" rail length, 2.5" #15 ports, triple take up.

 

32056- Chester Jensen, Plate Heat Exchanger model HMC, stainless steel, can be engineered to meet specific duties, 2.5" bevel seat ports dual take up high pressure frame size 63.

 

24230- Chester Jensen, Plate Heat Exchanger model HMC, stainless steel, can be engineered to meet specific duties, 2.5" bevel seat ports, dual take up high pressure frame, size 55, 2.5" clamp connections.

 

50589p- Chester Jensen, Plate Heat Exchanger model HMC55, 2.5" #15 ports, double take up, 72" rail length

 

50590p- Chester Jensen, Plate Heat Exchanger model HMC95, 2.5" #15 ports, double take up, 100" rail length

 

36390p- Chester Jensen, Plate Heat Exchanger model HMC95, 2.5" #15 ports, double take-up, 100" rail length

 

10414- Chester Jensen, Plate Heat Exchanger model HMFS, size 55, stainless steel, bolted take up, that can be engineered to meet specific duties, 2.5" clamp connections.

 

44791p- Chester Jensen, Plate Heat Exchanger Press Assembly model HMC90, stainless steel construction 2.5" #15 threaded ports double take up 95" rail length

 

66925- Chester Jensen, Plate Heat Exchangers model HT, stainless steel, of various capacities that can be engineered to meet specific duties, 2" bevel seat connections, single take up, size 48

 

36573p- Creamery Package, Plate Heat Exchanger, stainless steel, unit complete with divider block with 36 plates measuring 13" x 42" for 150 square feet of heat transfer, 2" inlet/outlet

 

3754- Crepaco, Connector Terminals model "SC", 1" & 2" port.

 

8458p- Crepaco, Heat Exchanger Frame model CR5, stainless steel, that can be engineered to specific duties, dual spindle take up, size 3 frame, 4" clamp connections. Unit without tightening bars.

 

51051p- Crepaco, Heat Exchanger Frame model CR5HYD, stainless steel, can be engineered to specific duties, hydraulic take up, size 9 frame, 4" clamp connections. Unit without tightening bars.

 

8478- Crepaco, Heat Exchanger Frame model CXC, dual spindle, stainless steel only, hydraulic take up.

 

8477- Crepaco, Heat Exchanger Frame model CXC, dual spindle, stainless steel only, mechanical take up.

 

8476- Crepaco, Heat Exchanger Frame model CXC, single spindle, stainless steel, only.

 

3746- Crepaco, Heat Exchanger Plates model SC.

 

9172- Crepaco, Plate Heat Exchanger model CXC, stainless steel, 48/48 plates with 1 connector terminal, 2.5" clamp connections.

 

56501- Crepaco, Plate Heat Exchanger model SC, stainless steel, tie bar style heat, 1.5" #15 threaded port, 24" rail length

 

29357- Crepaco, Tie Bar Take Up Plate Heat Exchanger model CXC, painted frame, 49 plates, 44" frame, 2" NPT connections.

 

67750- Delaval Single Section Cooling Plate, 65" long x 32" wide x 64" high

 

51628- DeLaval, Heat Exchanger Frame model P13RC, all stainless steel construction, 48" rail length, 2" clamp ports

 

18462- DeLaval, Heat Exchanger Frame model P14RC only, stainless steel, 2.5" bevel seat connections, 46" frame.

 

8483- DeLaval, Heat Exchanger Frame model P15RC, stainless steel , 3" clamp connections.

 

48393- DeLaval, Heat Exchanger model P5, 3 sections, first section has 13 plates, second section has 33 plates & third section has 12 plates

 

51634- DeLaval, Heat Exchanger Plates model P13

 

48967- DeLaval, Heat Exchanger Plates, (74)

 

56927- DeLaval, Plate Cooler model P13, wall mount, 22 plates

 

48394- DeLaval, Plate Cooler model P13, with 58 plates

 

40338- DeLaval, Plate Cooler model P13RC

 

643- DeLaval, Plate Heat Exchanger model P14RC, 3 section, 69 plates. *NOTE* There are no pictures of this unit. Have removed all of the plates out of the frames and stored them separately on pallets in the warehouse to prevent theft.

 

67308p- DeLaval, Plate heat exchanger model P5-RC 2 section, with press in style gaskets

 

33313p- DeLaval, Plate Heat Exchanger Press Assembly model P14RC, stainless steel, 2.5" tri clamp port

 

43449p- DeLaval, Plate Heat Exchanger stainless steel, 30 plates 16" wide x 46" long stainless steel plates

 

68487- DeLaval, Press Assembly model P14RC, stainless steel, 2.5" #15 ports

 

56320- DeLaval, Tie Bar Heat Exchanger model P20HB, painted frame, 25mm connections, 22/44 plates

 

68595p- GC, Heat Exchange Plates model PRO 5, 316 stainless steel, consisting of 308 PRO 5 Plus & 121 PRO 5

 

60371- GEA Ahlborn, Plate Heat Exchanger model 161, Frame only, working pressure 89 PSI, working temp 212, US gallons 77.6, max 57- 1/16", minimum 57". All stainless steel.

 

49472p- Good Nature, Plate & Frame Heat Exchanger, model SR15, (76) 8.25" wide x 22.5" long plates, presently configured for 13 heating plates with 63 plate regenerating section, previously used as part of apple juice pasteurizer at 650 gallons per minute at 170 F

 

58159p- ITT Industries, Plate Heat Exchanger, 19 square foot, National Board #133027, rated for 150 PSI at 248 F maximum working pressure (MAWP), (9) 34.5" x 9" stainless steel plates, (3) 2" sanitary tri clamp fittings, 2" fitting, overall dimensions 36" long x 12" wide x 15" tall

 

60822p- ITT Standard model PF8 Plate heat exchanger

 

66836p- ITT Standard, "Plate Flow" Heat Exchanger model PF321, 10" x 30" plate type, all stainless steel food grade construction, 1.5" inlet & outlet with tri clamp connections, National Board rated (#64205) for 150 PSI at 248 F, minimum working temperature 0 F at 150 PSI, minimum differential pressure 225 PSI, manufacturing part #SY564000001005-642-22-007-001, maximum bundle thickness .960", mounted in stainless steel frame with push handle & casters, plates covered by OSHA required bundle splash guard, formerly used for cooling in beverage products lab

 

65382- ITT Standard, Plate Heat Exchanger, 45 plates 18-1/8" long x 5-1/8" wide, surface area 5 gallons at 12.2 seconds at 80 PSI

 

62668- Mojonnier, Falling Film Cabinet type Chiller model 456, stainless steel, 4 plates, plates measure 24" wide x 36" high, overall dimensions 30" wide x 36" long x 60" high

 

58155p- Mueller, Accutherm Plate Heat Exchanger model AT20C20, 111 square foot, stainless steel, maximum working pressure 100 PSI at 150 F, carbon steel 2" NPT, carbon steel 1.5" NPT with 1" reducer on top, 2" NPT & 1.5" NPT with 1" reducer on bottom, maximum pack length for plates is 6.51" & minimum if 6.29"

 

27616p- Mueller, Accutherm Plate Heat Exchanger model AT20C20, 81 square foot surface area, (27) 304 stainless steel plates, mild steel frame, 2.5" bolted flange type inlets/outlets.

 

55797p- Mueller, Accutherm Plate Heat Exchanger model AT40 F20, 202 square feet, National Board #41142, stainless steel, (41) 54" x 17" plates, maximum working pressure is 150 PSI at 350 F, minimum design metal temperature is 32 F at 150 PSI, maximum pack length for 41 plates is 9.39" & minimum is 9.07" (currently at 9.07"), (4) 3" sanitary tri clamp inlets/outlets, EDBM gasket material, plates are on stainless steel rods that connect to carbon steel ends

 

58036p- Mueller, Accutherm Plate Heat Exchanger model AT40F20

 

45252- Mueller, Painted Frame Tie Bar Plate Heat Exchanger model AT161SSB10, 3" clamp connections 4 total plates

 

66776p- Mueller, Plate Cooler model AT20DFM71

 

36581p- Mueller, Plate Heat Exchanger model A1110C20, hot water system, with 2 HP circulating pump, 3450 RPM, system is unitized on stand with in line temperature sets & controls for valves, heat exchanger is approximately 25 square feet surface area

 

48073p- Mueller, Plate Heat Exchanger model AT20C20

 

42522- Mueller, Tri Plate B Pre Heater, 5 ton unit.

 

65800p- Open Chill Flume/Open Wash Flume, with plate chiller, stainless steel, 16" wide x 24' 10" long x 8" deep chilled water flume trough with 2 plate chillers mounted inline over trough, each chiller has 2 dimple jacketed cascade chill plates each is 39" wide x 106.5" (8' 10.5") long, over head 4" diameter stainless steel drizzle pipe to circulating water in laminar flow over the plates, chilled water runs into bottom catch pan with perforated bottom, so that chilled water is applied to product continuously along entire length of washer flume, flume was configured to be/was previously used along a wall to save space, all food grade sanitary stainless steel construction, does not include refrigeration equipment

 

67854- Paraflow, Plate Heat Exchanger model 5510-484, 2 section

 

48978- Rails for APV model R51 size 6 frame heat exchanger, set of two 126"

 

41554p- Sentry Equipment, Plate Heat Exchanger & Frame model SPGC5022316E11H10L, on stainless steel skid, all contact parts are constructed of 316 stainless steel, 22 plates (10" x 27") for 40 square feet of transfer surface, designed for 100 PSI at 279 F, can handle flow of 100 to 220 GPM, 2" inlet & outlets, skid also includes 1 Grundfos stainless steel construction vertical inline centrifugal pump on skid type CRN1-7 UP=G-E-HQQE model A96082691-P10513569, 9.7 GPM at 148 feet of lift, 3/4 HP electric motor turns at 3450 RPM, requires 230/460 vac 3 phase electrical supply, 1 Waren 2" stainless steel check valve, 1 Crane Saunder 2" diaphragm valve, (3) 2" stainless steel ball valves, (4) 1" stainless steel ball valves, 3 square D 30 amp disconnects, 1 Fisher control type 92S steam pressure regulator, 1 steam pressure relief valve, skid was producing hot caustic for a CIP system

 

12731p- Sentry, Plate Heat Exchanger model 5038, 49.40 square foot, 316 stainless steel, 38 plates, gaskets are EPDM, 3" diameter connections 2 at top & 2 at bottom on same side of Heat Exchanger, tri clamp fittings, operating 100 PSI at 300 F, carbon steel frame, overall 33" long x 14" wide x 33" high.

 

60372p- Sentry, Plate Heat Exchanger model 5054, 69.97 square foot, 316 stainless steel, 54 plates, gasket are EPDM, 3" diameter connections, operating pressure 100 PSI at 302F. Carbon steel frame.

 

47303p- Spencer, Plate Heat Exchanger, 14 square feet stainless steel, (20) 8" x 20" plates

 

47302p- Spencer, Plate Heat Exchanger, 97 square feet stainless steel, (19) 16" x 46" plates, three 2" flanged fittings & one 4" flanged fitting, carbon steel frame, no name plate

 

65381- SPX, Plate Heat Exchanger model SR15S, type APV, 2 section, 108 total plates, stainless ends, hot water 55 GPM 190-184 F, tempered water 10 GPM 125-146 F, original product coffee creamer 8.6 GPM 140-181 F size of plates, 7" x 20" approximately

 

46339p- St Regis, Plate Heat Exchanger, stainless steel complete with divider block with approximately 40 plates measuring 10" x 36" for 145 square feet of heat transfer

 

68637p- Super Changer Plate Heat Exchanger model S8-HP-60, 443.3 square foot, stainless steel construction, rated 100 PSI at 282 F, 11.42" minimum pack depth, 11.65" maximum pack depth, 8" inlet/outlets

 

38300p- Tolan, book cooler stainless steel sanitary construction unit features 16- 5' x 5' cooling plates connected to heating/cooling manifold in hinged book design 4 manifold inlets with NPT threaded connections bottom drain pan with sloped bottom to 3" product outlet with Acme threaded connection product distribution pan located above plates with drip holes & entire unit is shrouded with hood hinged cover

 

68638p- Tranter Plate Heat Exchanger model GCP-026-M-5-NP-46, 123 square foot, stainless steel plates, rated 100 PSI at 150 F, 4" inlet/outlet

 

67769- Tranter Super Changer Plate Heat Exchanger model UX-216-HP-82, steel frame with approximately 160 stainless plates, 100 PSI 225 F, 329.9 square feet, 2" 4-bolt flanged ports

 

58158p- Tranter Super Changer, Plate Heat Exchanger model EC72372H, 1922.4 square foot, stainless steel, maximum working pressure 100 PSI at 150 F, minimum design metal temperature 30 F at 100 PSI, (4) 8" carbon steel flange inlets/outlets, plates stainless steel that connect to carbon steel ends, was last used with a chiller system

 

55401p- Tranter Super Changer, Plate Heat Exchanger model S8HP129, 250 F maximum temperature, 150 PSI test pressure, 970.6 square foot of surface area, 25.47" plate pack dimension, 32" W x 106" H x 84" D overall dimensions, 6,400 pound overall weight, drawing #D-38118-2 or #D-38118, shop order #38118, last used in a paper processing plant cooling process water (was not used in any sort of chemical process), inlet and outlet 8"

 

57682p- Tranter Super Changer, Plate Heat Exchanger model S8HP60, 443.3 square foot, stainless steel construction, rated 115 PSI at 282F, 11.42" minimum pack depth, 11.65" maximum pack depth, 8" inlet/outlets

 

58157p- Tranter Super Changer, Plate Heat Exchanger model UX056UJ30, 17.8 square foot, stainless steel, maximum working pressure 100 PSI at 260 F, minimum design metal temperature 10 F at 100 PSI, 1" flange inlet, 2" NPT inlet on top, 1" flange outlet, 1" NPT outlet on bottom, maximum pack length for plates is 3.78" & minimum is 3.54"

 

58156p- Tranter Super Changer, Plate Heat Exchanger model UX066UJ48, 29.2 square foot, stainless steel, maximum working pressure 75 PSI at 266 F, (2) 2" NPT inlet on top, 2" NPT outlet, 1" NPT outlet on bottom, maximum pack length for plates is 6.05" & minimum is 5.67"

 

64215p- Tranter Super Changer, 46.8 square foot Stainless Steel Plate Heat Exchanger model UX018UJ52, maximum working pressure 150 PSI at 200 F, (4) 2" flange inlets & outlets, maximum pack length for the plates is 6.96" & minimum is 6.55"

 

56027p- Tranter, Super Changer Plate & Frame Heat Exchanger model UX016UJ52, 46.8 square foot surface area in 52 stainless steel plates each 8" wide x 24" long, 2" product inlet/outlet, 1" media inlet/outlet, all inlet/outlet connections are flanged, all stainless steel contacts, manufacturer rated for maximum working temperature of 100 F & 50 PSI, painted steel external support frame, last used as liquid chiller for food product, was originally specified for 180 gallons per minute, chilling from 95 to 88, using 55 chilled water cooling media at 27.5 gallons per minute, with water temperature increasing to 87.94

 

68486- Tri Clover, Plate Heat Exchanger model 262D121-2

 

65755- Turbo Chiller, Plate Chiller model HATDA721213, stainless steel, falling film cabinet type, full flooded ammonia refrigerated, has 13 stainless steel plates, each 8' long x 5' high, connected with stainless steel manifold, fully insulated stainless steel cabinet with hinged access doors, main cabinet measures 10' long x 5' wide x 9' 7" high, includes surge drum & miscellaneous refrigerant piping

 

 

HTST Pasteurizers | Home Page | UHT Pasteurizer System | Tubular Heat Exchanger | Scraped Surface Heat Exchangers | HTST Pieces